qutebrowser: update quickmarks

[dotfiles.git] / qutebrowser / config.py

diff --git a/qutebrowser/config.py b/qutebrowser/config.py
index 4b308310b21e434eea83d6b63a03178122c29040..81a4238b2cf96b8756632c0cac20a2b0de792d54 100644 (file)
--- a/qutebrowser/config.py
+++ b/qutebrowser/config.py
@@ -1,11 +1,24 @@
 ## Autogenerated config.py
 ## Autogenerated config.py

+##
+## NOTE: config.py is intended for advanced users who are comfortable
+## with manually migrating the config file on qutebrowser upgrades. If
+## you prefer, you can also configure qutebrowser using the
+## :set/:bind/:config-* commands without having to write a config.py
+## file.
+##

 ## Documentation:
 ##   qute://help/configuring.html
 ##   qute://help/settings.html
 
 ## Documentation:
 ##   qute://help/configuring.html
 ##   qute://help/settings.html
 

-## This is here so configs done via the GUI are still loaded.
-## Remove it to not load settings done via the GUI.
-config.load_autoconfig()
+def in_terminal(cmd: list):
+    """Wraps cmd to be run in the default TERMINAL, as set by environment.
+
+    :cmd: cmd to execute in TERMINAL
+    :returns: A shell command as a list
+    """
+    from os import getenv
+    t = getenv('TERMINAL', 'xterm')
+    return [t, '-e'] + cmd

 
 try:
     from qutebrowser.api import interceptor, message
 
 try:
     from qutebrowser.api import interceptor, message


@@ -14,7 +27,7 @@ try:
     def intercept(info: interceptor.Request):
         url = info.request_url
         if url.host() == "twitter.com":
     def intercept(info: interceptor.Request):
         url = info.request_url
         if url.host() == "twitter.com":

-            url.setHost("nitter.net")
+            url.setHost("nitter.eu")

             message.info("Redirecting to " + url.toString())
             info.redirect(url)
         if url.host() == "xkcd.com":
             message.info("Redirecting to " + url.toString())
             info.redirect(url)
         if url.host() == "xkcd.com":


@@ -26,10 +39,17 @@ try:
             message.info("Redirecting to " + url.toString())
             info.redirect(url)
 
             message.info("Redirecting to " + url.toString())
             info.redirect(url)
 

-    interceptor.register(intercept)
+    #FIXME: trying this disabled for a bit to test if qb crashes less
+    #2022-08-16 enabling it again (and off again)
+    # yeah crashed immediately
+    # interceptor.register(intercept)

 except ImportError:
     pass
 
 except ImportError:
     pass
 

+## This is here so configs done via the GUI are still loaded.
+## Remove it to not load settings done via the GUI.
+config.load_autoconfig(True)
+

 ## Aliases for commands. The keys of the given dictionary are the
 ## aliases, while the values are the commands they map to.
 ## Type: Dict
 ## Aliases for commands. The keys of the given dictionary are the
 ## aliases, while the values are the commands they map to.
 ## Type: Dict


@@ -57,29 +77,51 @@ c.aliases = {'w':    'session-save',
 c.auto_save.session = True
 
 ## Backend to use to display websites. qutebrowser supports two different
 c.auto_save.session = True
 
 ## Backend to use to display websites. qutebrowser supports two different

-## web rendering engines / backends, QtWebKit and QtWebEngine. QtWebKit
-## was discontinued by the Qt project with Qt 5.6, but picked up as a
-## well maintained fork: https://github.com/annulen/webkit/wiki -
-## qutebrowser only supports the fork. QtWebEngine is Qt's official
-## successor to QtWebKit. It's slightly more resource hungry than
-## QtWebKit and has a couple of missing features in qutebrowser, but is
-## generally the preferred choice.
+## web rendering engines / backends, QtWebEngine and QtWebKit (not
+## recommended). QtWebEngine is Qt's official successor to QtWebKit, and
+## both the default/recommended backend. It's based on a stripped-down
+## Chromium and regularly updated with security fixes and new features by
+## the Qt project: https://wiki.qt.io/QtWebEngine QtWebKit was
+## qutebrowser's original backend when the project was started. However,
+## support for QtWebKit was discontinued by the Qt project with Qt 5.6 in
+## 2016. The development of QtWebKit was picked up in an official fork:
+## https://github.com/qtwebkit/qtwebkit - however, the project seems to
+## have stalled again. The latest release (5.212.0 Alpha 4) from March
+## 2020 is based on a WebKit version from 2016, with many known security
+## vulnerabilities. Additionally, there is no process isolation and
+## sandboxing. Due to all those issues, while support for QtWebKit is
+## still available in qutebrowser for now, using it is strongly
+## discouraged.

 ## Type: String
 ## Valid values:
 ## Type: String
 ## Valid values:

-##   - webengine: Use QtWebEngine (based on Chromium).
-##   - webkit: Use QtWebKit (based on WebKit, similar to Safari).
+##   - webengine: Use QtWebEngine (based on Chromium - recommended).
+##   - webkit: Use QtWebKit (based on WebKit, similar to Safari - many known security issues!).

 # c.backend = 'webengine'
 
 # c.backend = 'webengine'
 

-## This setting can be used to map keys to other keys. When the key used
-## as dictionary-key is pressed, the binding for the key used as
-## dictionary-value is invoked instead. This is useful for global
-## remappings of keys, for example to map Ctrl-[ to Escape. Note that
-## when a key is bound (via `bindings.default` or `bindings.commands`),
-## the mapping is ignored.
+## Map keys to other keys, so that they are equivalent in all modes. When
+## the key used as dictionary-key is pressed, the binding for the key
+## used as dictionary-value is invoked instead. This is useful for global
+## remappings of keys, for example to map <Ctrl-[> to <Escape>. NOTE:
+## This should only be used if two keys should always be equivalent, i.e.
+## for things like <Enter> (keypad) and <Return> (non-keypad). For normal
+## command bindings, qutebrowser works differently to vim: You always
+## bind keys to commands, usually via `:bind` or `config.bind()`. Instead
+## of using this setting, consider finding the command a key is bound to
+## (e.g. via `:bind gg`) and then binding the same command to the desired
+## key. Note that when a key is bound (via `bindings.default` or
+## `bindings.commands`), the mapping is ignored.

 ## Type: Dict
 ## Type: Dict

-# c.bindings.key_mappings = {'<Ctrl-[>': '<Escape>', '<Ctrl-6>': '<Ctrl-^>', '<Ctrl-M>': '<Return>', '<Ctrl-J>': '<Return>', '<Ctrl-I>': '<Tab>', '<Shift-Return>': '<Return>', '<Enter>': '<Return>', '<Shift-Enter>': '<Return>', '<Ctrl-Enter>': '<Ctrl-Return>'}
+c.bindings.key_mappings = {'<Ctrl-6>': '<Ctrl-^>', '<Ctrl-M>': '<Return>', '<Ctrl-J>': '<Return>', '<Ctrl-I>': '<Tab>', '<Shift-Return>': '<Return>', '<Enter>': '<Return>', '<Shift-Enter>': '<Return>', '<Ctrl-Enter>': '<Ctrl-Return>'}
+
+## When to show a changelog after qutebrowser was upgraded.
+## Type: String
+## Valid values:
+##   - major: Show changelog for major upgrades (e.g. v2.0.0 -> v3.0.0).
+##   - minor: Show changelog for major and minor upgrades (e.g. v2.0.0 -> v2.1.0).
+##   - patch: Show changelog for major, minor and patch upgrades (e.g. v2.0.0 -> v2.0.1).
+##   - never: Never show changelog after upgrades.
+c.changelog_after_upgrade = 'patch'

 
 

-#TODO

 ## Which algorithm to use for modifying how colors are rendered with
 ## darkmode. The `lightness-cielab` value was added with QtWebEngine 5.14
 ## and is treated like `lightness-hsl` with older QtWebEngine versions.
 ## Which algorithm to use for modifying how colors are rendered with
 ## darkmode. The `lightness-cielab` value was added with QtWebEngine 5.14
 ## and is treated like `lightness-hsl` with older QtWebEngine versions.


@@ -131,7 +173,9 @@ c.auto_save.session = True
 ##   - smart: Apply dark mode based on image content. Not available with Qt 5.15.0.
 # c.colors.webpage.darkmode.policy.images = 'smart'
 
 ##   - smart: Apply dark mode based on image content. Not available with Qt 5.15.0.
 # c.colors.webpage.darkmode.policy.images = 'smart'
 

-## Which pages to apply dark mode to.
+## Which pages to apply dark mode to. The underlying Chromium setting has
+## been removed in QtWebEngine 5.15.3, thus this setting is ignored
+## there. Instead, every element is now classified individually.

 ## Type: String
 ## Valid values:
 ##   - always: Apply dark mode filter to all frames, regardless of content.
 ## Type: String
 ## Valid values:
 ##   - always: Apply dark mode filter to all frames, regardless of content.


@@ -153,9 +197,17 @@ c.auto_save.session = True
 ## Type: Int
 # c.colors.webpage.darkmode.threshold.text = 256
 
 ## Type: Int
 # c.colors.webpage.darkmode.threshold.text = 256
 

-## Force `prefers-color-scheme: dark` colors for websites.
-## Type: Bool
-c.colors.webpage.prefers_color_scheme_dark = True
+## Value to use for `prefers-color-scheme:` for websites. The "light"
+## value is only available with QtWebEngine 5.15.2+. On older versions,
+## it is the same as "auto". The "auto" value is broken on QtWebEngine
+## 5.15.2 due to a Qt bug. There, it will fall back to "light"
+## unconditionally.
+## Type: String
+## Valid values:
+##   - auto: Use the system-wide color scheme setting.
+##   - light: Force a light theme.
+##   - dark: Force a dark theme.
+# c.colors.webpage.preferred_color_scheme = 'auto'

 
 ## Number of commands to save in the command history. 0: no history / -1:
 ## unlimited
 
 ## Number of commands to save in the command history. 0: no history / -1:
 ## unlimited


@@ -231,9 +283,9 @@ c.completion.shrink = True
 
 ## A list of patterns which should not be shown in the history. This only
 ## affects the completion. Matching URLs are still saved in the history
 
 ## A list of patterns which should not be shown in the history. This only
 ## affects the completion. Matching URLs are still saved in the history

-## (and visible on the qute://history page), but hidden in the
-## completion. Changing this setting will cause the completion history to
-## be regenerated on the next start, which will take a short while.
+## (and visible on the `:history` page), but hidden in the completion.
+## Changing this setting will cause the completion history to be
+## regenerated on the next start, which will take a short while.

 ## Type: List of UrlPattern
 # c.completion.web_history.exclude = []
 
 ## Type: List of UrlPattern
 # c.completion.web_history.exclude = []
 


@@ -270,6 +322,12 @@ c.confirm_quit = ['downloads']
 ## Type: Bool
 # c.content.blocking.enabled = True
 
 ## Type: Bool
 # c.content.blocking.enabled = True
 

+## Block subdomains of blocked hosts. Note: If only a single subdomain is
+## blocked but should be allowed, consider using
+## `content.blocking.whitelist` instead.
+## Type: Bool
+# c.content.blocking.hosts.block_subdomains = True
+

 ## List of URLs to host blocklists for the host blocker.  Only used when
 ## the simple host-blocker is used (see `content.blocking.method`).  The
 ## file can be in one of the following formats:  - An `/etc/hosts`-like
 ## List of URLs to host blocklists for the host blocker.  Only used when
 ## the simple host-blocker is used (see `content.blocking.method`).  The
 ## file can be in one of the following formats:  - An `/etc/hosts`-like


@@ -318,7 +376,7 @@ c.confirm_quit = ['downloads']
 ## page cache allows for a nicer user experience when navigating forth or
 ## back to pages in the forward/back history, by pausing and resuming up
 ## to _n_ pages. For more information about the feature, please refer to:
 ## page cache allows for a nicer user experience when navigating forth or
 ## back to pages in the forward/back history, by pausing and resuming up
 ## to _n_ pages. For more information about the feature, please refer to:

-## http://webkit.org/blog/427/webkit-page-cache-i-the-basics/
+## https://webkit.org/blog/427/webkit-page-cache-i-the-basics/

 ## Type: Int
 # c.content.cache.maximum_pages = 0
 
 ## Type: Int
 # c.content.cache.maximum_pages = 0
 


@@ -341,14 +399,21 @@ c.confirm_quit = ['downloads']
 ## unknown-3rdparty` per-domain on QtWebKit will have the same effect as
 ## `all`. If this setting is used with URL patterns, the pattern gets
 ## applied to the origin/first party URL of the page making the request,
 ## unknown-3rdparty` per-domain on QtWebKit will have the same effect as
 ## `all`. If this setting is used with URL patterns, the pattern gets
 ## applied to the origin/first party URL of the page making the request,

-## not the request URL.
+## not the request URL. With QtWebEngine 5.15.0+, paths will be stripped
+## from URLs, so URL patterns using paths will not match. With
+## QtWebEngine 5.15.2+, subdomains are additionally stripped as well, so
+## you will typically need to set this setting for `example.com` when the
+## cookie is set on `somesubdomain.example.com` for it to work properly.
+## To debug issues with this setting, start qutebrowser with `--debug
+## --logfilter network --debug-flag log-cookies` which will show all
+## cookies being set.

 ## Type: String
 ## Valid values:
 ##   - all: Accept all cookies.
 ##   - no-3rdparty: Accept cookies from the same origin only. This is known to break some sites, such as GMail.
 ##   - no-unknown-3rdparty: Accept cookies from the same origin only, unless a cookie is already set for the domain. On QtWebEngine, this is the same as no-3rdparty.
 ##   - never: Don't accept cookies at all.
 ## Type: String
 ## Valid values:
 ##   - all: Accept all cookies.
 ##   - no-3rdparty: Accept cookies from the same origin only. This is known to break some sites, such as GMail.
 ##   - no-unknown-3rdparty: Accept cookies from the same origin only, unless a cookie is already set for the domain. On QtWebEngine, this is the same as no-3rdparty.
 ##   - never: Don't accept cookies at all.

-c.content.cookies.accept = 'never'
+c.content.cookies.accept = 'no-3rdparty'

 
 ## Store cookies.
 ## Type: Bool
 
 ## Store cookies.
 ## Type: Bool


@@ -369,7 +434,7 @@ c.content.cookies.accept = 'never'
 
 ## Try to pre-fetch DNS entries to speed up browsing.
 ## Type: Bool
 
 ## Try to pre-fetch DNS entries to speed up browsing.
 ## Type: Bool

-c.content.dns_prefetch = True
+# c.content.dns_prefetch = True

 
 ## Expand each subframe to its contents. This will flatten all the frames
 ## to become one scrollable page.
 
 ## Expand each subframe to its contents. This will flatten all the frames
 ## to become one scrollable page.


@@ -410,8 +475,10 @@ c.content.headers.accept_language = 'en-UK;q=1.0, en;q=0.9, de;q=0.7, fr;q=0.7,
 # c.content.headers.do_not_track = True
 
 ## When to send the Referer header. The Referer header tells websites
 # c.content.headers.do_not_track = True
 
 ## When to send the Referer header. The Referer header tells websites

-## from which website you were coming from when visiting them. No restart
-## is needed with QtWebKit.
+## from which website you were coming from when visiting them. Note that
+## with QtWebEngine, websites can override this preference by setting the
+## `Referrer-Policy:` header, so that any websites visited from them get
+## the full referer. No restart is needed with QtWebKit.

 ## Type: String
 ## Valid values:
 ##   - always: Always send the Referer.
 ## Type: String
 ## Valid values:
 ##   - always: Always send the Referer.


@@ -435,31 +502,6 @@ c.content.headers.accept_language = 'en-UK;q=1.0, en;q=0.9, de;q=0.7, fr;q=0.7,
 ## Type: FormatString
 # c.content.headers.user_agent = 'Mozilla/5.0 ({os_info}) AppleWebKit/{webkit_version} (KHTML, like Gecko) {qt_key}/{qt_version} {upstream_browser_key}/{upstream_browser_version} Safari/{webkit_version}'
 
 ## Type: FormatString
 # c.content.headers.user_agent = 'Mozilla/5.0 ({os_info}) AppleWebKit/{webkit_version} (KHTML, like Gecko) {qt_key}/{qt_version} {upstream_browser_key}/{upstream_browser_version} Safari/{webkit_version}'
 

-## Enable host blocking.
-## Type: Bool
-# c.content.host_blocking.enabled = True
-
-## List of URLs of lists which contain hosts to block.  The file can be
-## in one of the following formats:  - An `/etc/hosts`-like file - One
-## host per line - A zip-file of any of the above, with either only one
-## file, or a file   named `hosts` (with any extension).  It's also
-## possible to add a local file or directory via a `file://` URL. In case
-## of a directory, all files in the directory are read as adblock lists.
-## The file `~/.config/qutebrowser/blocked-hosts` is always read if it
-## exists.
-## Type: List of Url
-# c.content.host_blocking.lists = ['https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts']
-
-## A list of patterns that should always be loaded, despite being ad-
-## blocked. Note this whitelists blocked hosts, not first-party URLs. As
-## an example, if `example.org` loads an ad from `ads.example.org`, the
-## whitelisted host should be `ads.example.org`. If you want to disable
-## the adblocker on a given page, use the `content.host_blocking.enabled`
-## setting with a URL pattern instead. Local domains are always exempt
-## from hostblocking.
-## Type: List of UrlPattern
-# c.content.host_blocking.whitelist = []
-

 ## Enable hyperlink auditing (`<a ping>`).
 ## Type: Bool
 # c.content.hyperlink_auditing = False
 ## Enable hyperlink auditing (`<a ping>`).
 ## Type: Bool
 # c.content.hyperlink_auditing = False


@@ -472,12 +514,6 @@ c.content.headers.accept_language = 'en-UK;q=1.0, en;q=0.9, de;q=0.7, fr;q=0.7,
 ## Type: Bool
 # c.content.javascript.alert = True
 
 ## Type: Bool
 # c.content.javascript.alert = True
 

-## Allow JavaScript to read from or write to the clipboard. With
-## QtWebEngine, writing the clipboard as response to a user interaction
-## is always allowed.
-## Type: Bool
-# c.content.javascript.can_access_clipboard = False
-

 ## Allow JavaScript to close tabs.
 ## Type: Bool
 # c.content.javascript.can_close_tabs = False
 ## Allow JavaScript to close tabs.
 ## Type: Bool
 # c.content.javascript.can_close_tabs = False


@@ -486,6 +522,18 @@ c.content.headers.accept_language = 'en-UK;q=1.0, en;q=0.9, de;q=0.7, fr;q=0.7,
 ## Type: Bool
 # c.content.javascript.can_open_tabs_automatically = False
 
 ## Type: Bool
 # c.content.javascript.can_open_tabs_automatically = False
 

+## Allow JavaScript to read from or write to the clipboard. With
+## QtWebEngine, writing the clipboard as response to a user interaction
+## is always allowed.
+## Type: String
+## Valid values:
+##   - none: Disable access to clipboard.
+##   - access: Allow reading from and writing to the clipboard.
+##   - access-paste: Allow accessing the clipboard and pasting clipboard content.
+c.content.javascript.clipboard = 'none'
+config.set('content.javascript.clipboard', 'access', '*://*.gitlab.com/*')
+config.set('content.javascript.clipboard', 'access', '*://*.github.com/*')
+

 ## Enable JavaScript.
 ## Type: Bool
 # c.content.javascript.enabled = True
 ## Enable JavaScript.
 ## Type: Bool
 # c.content.javascript.enabled = True


@@ -499,6 +547,24 @@ c.content.headers.accept_language = 'en-UK;q=1.0, en;q=0.9, de;q=0.7, fr;q=0.7,
 ## Type: Dict
 # c.content.javascript.log = {'unknown': 'debug', 'info': 'debug', 'warning': 'debug', 'error': 'debug'}
 
 ## Type: Dict
 # c.content.javascript.log = {'unknown': 'debug', 'info': 'debug', 'warning': 'debug', 'error': 'debug'}
 

+## Javascript messages to *not* show in the UI, despite a corresponding
+## `content.javascript.log_message.levels` setting. Both keys and values
+## are glob patterns, with the key matching the location of the error,
+## and the value matching the error message. By default, the
+## https://web.dev/csp/[Content security policy] violations triggered by
+## qutebrowser's stylesheet handling are excluded, as those errors are to
+## be expected and can't be easily handled by the underlying code.
+## Type: Dict
+# c.content.javascript.log_message.excludes = {'userscript:_qute_stylesheet': ['*Refused to apply inline style because it violates the following Content Security Policy directive: *']}
+
+## Javascript message sources/levels to show in the qutebrowser UI. When
+## a JavaScript message is logged from a location matching the glob
+## pattern given in the key, and is from one of the levels listed as
+## value, it's surfaced as a message in the qutebrowser UI. By default,
+## errors happening in qutebrowser internally are shown to the user.
+## Type: Dict
+# c.content.javascript.log_message.levels = {'qute:*': ['error'], 'userscript:GM-*': [], 'userscript:*': ['error']}
+

 ## Use the standard JavaScript modal dialog for `alert()` and
 ## `confirm()`.
 ## Type: Bool
 ## Use the standard JavaScript modal dialog for `alert()` and
 ## `confirm()`.
 ## Type: Bool


@@ -568,15 +634,44 @@ c.content.headers.accept_language = 'en-UK;q=1.0, en;q=0.9, de;q=0.7, fr;q=0.7,
 ##   - true
 ##   - false
 ##   - ask
 ##   - true
 ##   - false
 ##   - ask

-c.content.notifications = 'ask'
-config.set('content.notifications', True, '*://*.gitlab.com/*')
-config.set('content.notifications', True, '*://*.google.com/*')
+c.content.notifications.enabled = 'ask'
+config.set('content.notifications.enabled', True, '*://*.gitlab.com/*')
+config.set('content.notifications.enabled', True, '*://*.google.com/*')
+
+## What notification presenter to use for web notifications. Note that
+## not all implementations support all features of notifications: - With
+## PyQt 5.14, any setting other than `qt` does not support  the `click`
+## and   `close` events, as well as the `tag` option to replace existing
+## notifications. - The `qt` and `systray` options only support showing
+## one notification at the time   and ignore the `tag` option to replace
+## existing notifications. - The `herbe` option only supports showing one
+## notification at the time and doesn't   show icons. - The `messages`
+## option doesn't show icons and doesn't support the `click` and
+## `close` events.
+## Type: String
+## Valid values:
+##   - auto: Tries `libnotify`, `systray` and `messages`, uses the first one available without showing error messages.
+##   - qt: Use Qt's native notification presenter, based on a system tray icon. Switching from or to this value requires a restart of qutebrowser. Recommended over `systray` on PyQt 5.14.
+##   - libnotify: Shows messages via DBus in a libnotify-compatible way. If DBus isn't available, falls back to `systray` or `messages`, but shows an error message.
+##   - systray: Use a notification presenter based on a systray icon. Falls back to `libnotify` or `messages` if not systray is available. This is a reimplementation of the `qt` setting value, but with the possibility to switch to it at runtime.
+##   - messages: Show notifications as qutebrowser messages. Most notification features aren't available.
+##   - herbe: (experimental!) Show notifications using herbe (github.com/dudik/herbe). Most notification features aren't available.
+# c.content.notifications.presenter = 'auto'
+
+## Whether to show the origin URL for notifications. Note that URL
+## patterns with this setting only get matched against the origin part of
+## the URL, so e.g. paths in patterns will never match. Note that with
+## the `qt` presenter, origins are never shown.
+## Type: Bool
+# c.content.notifications.show_origin = True

 
 

-## Allow pdf.js to view PDF files in the browser. Note that the files can
-## still be downloaded by clicking the download button in the pdf.js
-## viewer.
+## Display PDF files via PDF.js in the browser without showing a download
+## prompt. Note that the files can still be downloaded by clicking the
+## download button in the pdf.js viewer. With this set to `false`, the
+## `:prompt-open-download --pdfjs` command (bound to `<Ctrl-p>` by
+## default) can be used in the download prompt.

 ## Type: Bool
 ## Type: Bool

-# c.content.pdfjs = False
+c.content.pdfjs = True

 
 ## Allow websites to request persistent storage quota via
 ## `navigator.webkitPersistentStorage.requestQuota`.
 
 ## Allow websites to request persistent storage quota via
 ## `navigator.webkitPersistentStorage.requestQuota`.


@@ -591,6 +686,14 @@ config.set('content.notifications', True, '*://*.google.com/*')
 ## Type: Bool
 # c.content.plugins = False
 
 ## Type: Bool
 # c.content.plugins = False
 

+## Request websites to minimize non-essentials animations and motion.
+## This results in the `prefers-reduced-motion` CSS media query to
+## evaluate to `reduce` (rather than `no-preference`). On Windows, if
+## this setting is set to False, the system-wide animation setting is
+## considered.
+## Type: Bool
+# c.content.prefers_reduced_motion = False
+

 ## Draw the background color and images also when the page is printed.
 ## Type: Bool
 # c.content.print_element_backgrounds = True
 ## Draw the background color and images also when the page is printed.
 ## Type: Bool
 # c.content.print_element_backgrounds = True


@@ -603,7 +706,8 @@ config.set('content.notifications', True, '*://*.google.com/*')
 ## Proxy to use. In addition to the listed values, you can use a
 ## `socks://...` or `http://...` URL. Note that with QtWebEngine, it will
 ## take a couple of seconds until the change is applied, if this value is
 ## Proxy to use. In addition to the listed values, you can use a
 ## `socks://...` or `http://...` URL. Note that with QtWebEngine, it will
 ## take a couple of seconds until the change is applied, if this value is

-## changed at runtime.
+## changed at runtime. Authentication for SOCKS proxies isn't supported
+## due to Chromium limitations.

 ## Type: Proxy
 ## Valid values:
 ##   - system: Use the system wide proxy.
 ## Type: Proxy
 ## Valid values:
 ##   - system: Use the system wide proxy.


@@ -630,15 +734,36 @@ with config.pattern('*://calendar.google.com/*') as p:
 ## Enable quirks (such as faked user agent headers) needed to get
 ## specific sites to work properly.
 ## Type: Bool
 ## Enable quirks (such as faked user agent headers) needed to get
 ## specific sites to work properly.
 ## Type: Bool

-# c.content.site_specific_quirks = True
+# c.content.site_specific_quirks.enabled = True

 
 

-## Validate SSL handshakes.
-## Type: BoolAsk
+## Disable a list of named quirks. The js-string-replaceall quirk is
+## needed for Nextcloud Calendar < 2.2.0 with QtWebEngine < 5.15.3.
+## However, the workaround is not fully compliant to the ECMAScript spec
+## and might cause issues on other websites, so it's disabled by default.
+## Type: FlagList

 ## Valid values:
 ## Valid values:

-##   - true
-##   - false
-##   - ask
-# c.content.ssl_strict = 'ask'
+##   - ua-whatsapp
+##   - ua-google
+##   - ua-slack
+##   - ua-googledocs
+##   - js-whatsapp-web
+##   - js-discord
+##   - js-string-replaceall
+##   - js-globalthis
+##   - js-object-fromentries
+##   - js-array-at
+##   - misc-krunker
+##   - misc-mathml-darkmode
+# c.content.site_specific_quirks.skip = ['js-string-replaceall']
+
+## How to proceed on TLS certificate errors.
+## Type: String
+## Valid values:
+##   - ask: Ask how to proceed for every certificate error (unless non-overridable due to HSTS).
+##   - ask-block-thirdparty: Ask how to proceed for normal page loads, but silently block resource loads.
+##   - block: Automatically block loading on certificate errors.
+##   - load-insecurely: Force loading pages despite certificate errors. This is *insecure* and should be avoided. Instead of using this, consider fixing the underlying issue or importing a self-signed certificate via `certutil` (or Chromium) instead.
+# c.content.tls.certificate_errors = 'ask'

 
 ## How navigation requests to URLs with unknown schemes are handled.
 ## Type: String
 
 ## How navigation requests to URLs with unknown schemes are handled.
 ## Type: String


@@ -708,6 +833,13 @@ c.downloads.open_dispatcher = "rifle"
 ##   - bottom
 # c.downloads.position = 'top'
 
 ##   - bottom
 # c.downloads.position = 'top'
 

+## Automatically abort insecure (HTTP) downloads originating from secure
+## (HTTPS) pages. For per-domain settings, the relevant URL is the URL
+## initiating the download, not the URL the download itself is coming
+## from. It's not recommended to set this setting to false globally.
+## Type: Bool
+# c.downloads.prevent_mixed_content = True
+

 ## Duration (in milliseconds) to wait before removing finished downloads.
 ## If set to -1, downloads are never removed.
 ## Type: Int
 ## Duration (in milliseconds) to wait before removing finished downloads.
 ## If set to -1, downloads are never removed.
 ## Type: Int


@@ -720,35 +852,51 @@ c.downloads.open_dispatcher = "rifle"
 ## `{line0}`: Same as `{line}`, but starting from index 0. * `{column0}`:
 ## Same as `{column}`, but starting from index 0.
 ## Type: ShellCommand
 ## `{line0}`: Same as `{line}`, but starting from index 0. * `{column0}`:
 ## Same as `{column}`, but starting from index 0.
 ## Type: ShellCommand

-c.editor.command = ['urxvtc', '-e', 'vim', '{file}', '-c', 'normal {line}G{column0}l']
+c.editor.command = in_terminal(['vim', '{file}', '-c', 'normal {line}G{column0}l'])

 
 ## Encoding to use for the editor.
 ## Type: Encoding
 # c.editor.encoding = 'utf-8'
 
 
 ## Encoding to use for the editor.
 ## Type: Encoding
 # c.editor.encoding = 'utf-8'
 

+## Delete the temporary file upon closing the editor.
+## Type: Bool
+# c.editor.remove_file = True
+
+## Command (and arguments) to use for selecting a single folder in forms.
+## The command should write the selected folder path to the specified
+## file or stdout. The following placeholders are defined: * `{}`:
+## Filename of the file to be written to. If not contained in any
+## argument, the   standard output of the command is read instead.
+## Type: ShellCommand
+c.fileselect.folder.command = in_terminal(['ranger', '--choosedir={}'])
+

 ## Handler for selecting file(s) in forms. If `external`, then the
 ## Handler for selecting file(s) in forms. If `external`, then the

-## commands specified by `fileselect.single_file.command` and
-## `fileselect.multiple_files.command` are used to select one or multiple
-## files respectively.
+## commands specified by `fileselect.single_file.command`,
+## `fileselect.multiple_files.command` and `fileselect.folder.command`
+## are used to select one file, multiple files, and folders,
+## respectively.

 ## Type: String
 ## Valid values:
 ##   - default: Use the default file selector.
 ##   - external: Use an external command.
 ## Type: String
 ## Valid values:
 ##   - default: Use the default file selector.
 ##   - external: Use an external command.

-# c.fileselect.handler = 'default'
+c.fileselect.handler = 'external'

 
 ## Command (and arguments) to use for selecting multiple files in forms.
 
 ## Command (and arguments) to use for selecting multiple files in forms.

-## The command should write the selected file paths to the specified
-## file, separated by newlines. The following placeholders are defined: *
-## `{}`: Filename of the file to be written to.
+## The command should write the selected file paths to the specified file
+## or to stdout, separated by newlines. The following placeholders are
+## defined: * `{}`: Filename of the file to be written to. If not
+## contained in any argument, the   standard output of the command is
+## read instead.

 ## Type: ShellCommand
 ## Type: ShellCommand

-# c.fileselect.multiple_files.command = ['xterm', '-e', 'ranger', '--choosefiles={}']
+c.fileselect.multiple_files.command = in_terminal(['ranger', '--choosefiles={}'])

 
 ## Command (and arguments) to use for selecting a single file in forms.
 
 ## Command (and arguments) to use for selecting a single file in forms.

-## The command should write the selected file path to the specified file.
-## The following placeholders are defined: * `{}`: Filename of the file
-## to be written to.
+## The command should write the selected file path to the specified file
+## or stdout. The following placeholders are defined: * `{}`: Filename of
+## the file to be written to. If not contained in any argument, the
+## standard output of the command is read instead.

 ## Type: ShellCommand
 ## Type: ShellCommand

-# c.fileselect.single_file.command = ['xterm', '-e', 'ranger', '--choosefile={}']
+c.fileselect.single_file.command = in_terminal(['ranger', '--choosefile={}'])

 
 ## Font used in the completion categories.
 ## Type: Font
 
 ## Font used in the completion categories.
 ## Type: Font


@@ -771,7 +919,7 @@ c.editor.command = ['urxvtc', '-e', 'vim', '{file}', '-c', 'normal {line}G{colum
 ## font setting, it's replaced with the fonts listed here. If set to an
 ## empty value, a system-specific monospace default is used.
 ## Type: List of Font, or Font
 ## font setting, it's replaced with the fonts listed here. If set to an
 ## empty value, a system-specific monospace default is used.
 ## Type: List of Font, or Font

-c.fonts.default_family = ["Hack"]
+c.fonts.default_family = ["Fira Code"]

 
 ## Default font size to use. Whenever "default_size" is used in a font
 ## setting, it's replaced with the size listed here. Valid values are
 
 ## Default font size to use. Whenever "default_size" is used in a font
 ## setting, it's replaced with the size listed here. Valid values are


@@ -900,7 +1048,7 @@ c.hints.chars = 'aoeuidhtns'
 
 ## Leave hint mode when starting a new page load.
 ## Type: Bool
 
 ## Leave hint mode when starting a new page load.
 ## Type: Bool

-# c.hints.leave_on_load = True
+# c.hints.leave_on_load = False

 
 ## Minimum number of characters used for hint strings.
 ## Type: Int
 
 ## Minimum number of characters used for hint strings.
 ## Type: Int


@@ -938,7 +1086,31 @@ c.hints.scatter = False
 ## CSS selectors used to determine which elements on a page should have
 ## hints.
 ## Type: Dict
 ## CSS selectors used to determine which elements on a page should have
 ## hints.
 ## Type: Dict

-# c.hints.selectors = {'all': ['a', 'area', 'textarea', 'select', 'input:not([type="hidden"])', 'button', 'frame', 'iframe', 'img', 'link', 'summary', '[contenteditable]:not([contenteditable="false"])', '[onclick]', '[onmousedown]', '[role="link"]', '[role="option"]', '[role="button"]', '[ng-click]', '[ngClick]', '[data-ng-click]', '[x-ng-click]', '[tabindex]'], 'links': ['a[href]', 'area[href]', 'link[href]', '[role="link"][href]'], 'images': ['img'], 'media': ['audio', 'img', 'video'], 'url': ['[src]', '[href]'], 'inputs': ['input[type="text"]', 'input[type="date"]', 'input[type="datetime-local"]', 'input[type="email"]', 'input[type="month"]', 'input[type="number"]', 'input[type="password"]', 'input[type="search"]', 'input[type="tel"]', 'input[type="time"]', 'input[type="url"]', 'input[type="week"]', 'input:not([type])', '[contenteditable]:not([contenteditable="false"])', 'textarea']}
+c.hints.selectors = {'all': ['a', 'area', 'textarea', 'select',
+                             'input:not([type="hidden"])', 'button', 'frame',
+                             'iframe', 'img', 'link', 'summary',
+                             '[contenteditable]:not([contenteditable="false"])',
+                             '[onclick]', '[onmousedown]', '[role="link"]',
+                             '[role="option"]', '[role="button"]',
+                             '[role="tab"]', '[role="checkbox"]',
+                             '[role="menuitem"]', '[role="menuitemcheckbox"]',
+                             '[role="menuitemradio"]', '[role="treeitem"]',
+                             '[ng-click]', '[ngClick]', '[data-ng-click]',
+                             '[x-ng-click]', '[tabindex]:not([tabindex="-1"])'],
+                     'links': ['a[href]', 'area[href]', 'link[href]', '[role="link"][href]'],
+                     'images': ['img'],
+                     'media': ['audio', 'img', 'video'],
+                     'url': ['[src]', '[href]'],
+                     'inputs': ['input[type="text"]', 'input[type="date"]',
+                                'input[type="datetime-local"]',
+                                'input[type="email"]', 'input[type="month"]',
+                                'input[type="number"]', 'input[type="password"]',
+                                'input[type="search"]', 'input[type="tel"]',
+                                'input[type="time"]', 'input[type="url"]',
+                                'input[type="week"]', 'input:not([type])',
+                                '[contenteditable]:not([contenteditable="false"])',
+                                'textarea']
+                     }

 
 ## Make characters in hint strings uppercase.
 ## Type: Bool
 
 ## Make characters in hint strings uppercase.
 ## Type: Bool


@@ -980,7 +1152,7 @@ c.hints.scatter = False
 ## unreliable on this setting, and they may match the url you are
 ## navigating to, or the URL you are navigating from.
 ## Type: Bool
 ## unreliable on this setting, and they may match the url you are
 ## navigating to, or the URL you are navigating from.
 ## Type: Bool

-# c.input.insert_mode.leave_on_load = False
+c.input.insert_mode.leave_on_load = True

 
 ## Switch to insert mode when clicking flash and other plugins.
 ## Type: Bool
 
 ## Switch to insert mode when clicking flash and other plugins.
 ## Type: Bool


@@ -990,6 +1162,26 @@ c.hints.scatter = False
 ## Type: Bool
 # c.input.links_included_in_focus_chain = True
 
 ## Type: Bool
 # c.input.links_included_in_focus_chain = True
 

+## Interpret number prefixes as counts for bindings. This enables for vi-
+## like bindings that can be prefixed with a number to indicate a count.
+## Disabling it allows for emacs-like bindings where number keys are
+## passed through (according to `input.forward_unbound_keys`) instead.
+## Type: Bool
+# c.input.match_counts = True
+
+## Whether the underlying Chromium should handle media keys. On Linux,
+## disabling this also disables Chromium's MPRIS integration.
+## Type: Bool
+# c.input.media_keys = True
+
+## Mode to change to when focusing on a tab/URL changes.
+## Type: String
+## Valid values:
+##   - normal
+##   - insert
+##   - passthrough
+# c.input.mode_override = None
+

 ## Enable back and forward buttons on the mouse.
 ## Type: Bool
 # c.input.mouse.back_forward_buttons = True
 ## Enable back and forward buttons on the mouse.
 ## Type: Bool
 # c.input.mouse.back_forward_buttons = True


@@ -1004,14 +1196,14 @@ c.hints.scatter = False
 ## cleared after this time. If set to 0, partially typed bindings are
 ## never cleared.
 ## Type: Int
 ## cleared after this time. If set to 0, partially typed bindings are
 ## never cleared.
 ## Type: Int

-c.input.partial_timeout = 5000
+# c.input.partial_timeout = 0

 
 ## Enable spatial navigation. Spatial navigation consists in the ability
 
 ## Enable spatial navigation. Spatial navigation consists in the ability

-## to navigate between focusable elements in a Web page, such as
-## hyperlinks and form controls, by using Left, Right, Up and Down arrow
-## keys. For example, if the user presses the Right key, heuristics
-## determine whether there is an element he might be trying to reach
-## towards the right and which element he probably wants.
+## to navigate between focusable elements, such as hyperlinks and form
+## controls, on a web page by using the Left, Right, Up and Down arrow
+## keys. For example, if a user presses the Right key, heuristics
+## determine whether there is an element they might be trying to reach
+## towards the right and which element they probably want.

 ## Type: Bool
 # c.input.spatial_navigation = False
 
 ## Type: Bool
 # c.input.spatial_navigation = False
 


@@ -1056,7 +1248,7 @@ c.input.partial_timeout = 5000
 ## Duration (in milliseconds) to show messages in the statusbar for. Set
 ## to 0 to never clear messages.
 ## Type: Int
 ## Duration (in milliseconds) to show messages in the statusbar for. Set
 ## to 0 to never clear messages.
 ## Type: Int

-# c.messages.timeout = 2000
+# c.messages.timeout = 3000

 
 ## How to open links in an existing instance if a new one is launched.
 ## This happens when e.g. opening a link from a terminal. See
 
 ## How to open links in an existing instance if a new one is launched.
 ## This happens when e.g. opening a link from a terminal. See


@@ -1080,7 +1272,7 @@ c.input.partial_timeout = 5000
 ##   - last-opened: Open new tabs in the last (newest) opened window.
 ##   - last-focused: Open new tabs in the most recently focused window.
 ##   - last-visible: Open new tabs in the most recently visible window.
 ##   - last-opened: Open new tabs in the last (newest) opened window.
 ##   - last-focused: Open new tabs in the most recently focused window.
 ##   - last-visible: Open new tabs in the most recently visible window.

-# c.new_instance_open_target_window = 'last-focused'
+c.new_instance_open_target_window = 'last-visible'

 
 ## Show a filebrowser in download prompts.
 ## Type: Bool
 
 ## Show a filebrowser in download prompts.
 ## Type: Bool


@@ -1095,7 +1287,48 @@ c.input.partial_timeout = 5000
 ## https://peter.sh/experiments/chromium-command-line-switches/ for a
 ## list) will work.
 ## Type: List of String
 ## https://peter.sh/experiments/chromium-command-line-switches/ for a
 ## list) will work.
 ## Type: List of String

-c.qt.args = [str('proxy-pac-url=file://' / config.configdir / 'proxy.pac')]
+c.qt.args = ['proxy-pac-url=file://' + str(config.configdir / 'proxy.pac')]
+
+## When to use Chromium's low-end device mode. This improves the RAM
+## usage of renderer processes, at the expense of performance.
+## Type: String
+## Valid values:
+##   - always: Always use low-end device mode.
+##   - auto: Decide automatically (uses low-end mode with < 1 GB available RAM).
+##   - never: Never use low-end device mode.
+# c.qt.chromium.low_end_device_mode = 'auto'
+
+## Which Chromium process model to use. Alternative process models use
+## less resources, but decrease security and robustness. See the
+## following pages for more details:    -
+## https://www.chromium.org/developers/design-documents/process-models
+## - https://doc.qt.io/qt-5/qtwebengine-features.html#process-models
+## Type: String
+## Valid values:
+##   - process-per-site-instance: Pages from separate sites are put into separate processes and separate visits to the same site are also isolated.
+##   - process-per-site: Pages from separate sites are put into separate processes. Unlike Process per Site Instance, all visits to the same site will share an OS process. The benefit of this model is reduced memory consumption, because more web pages will share processes. The drawbacks include reduced security, robustness, and responsiveness.
+##   - single-process: Run all tabs in a single process. This should be used for debugging purposes only, and it disables `:open --private`.
+# c.qt.chromium.process_model = 'process-per-site-instance'
+
+## What sandboxing mechanisms in Chromium to use. Chromium has various
+## sandboxing layers, which should be enabled for normal browser usage.
+## Mainly for testing and development, it's possible to disable
+## individual sandboxing layers via this setting. Open `chrome://sandbox`
+## to see the current sandbox status. Changing this setting is only
+## recommended if you know what you're doing, as it **disables one of
+## Chromium's security layers**. To avoid sandboxing being accidentally
+## disabled persistently, this setting can only be set via `config.py`,
+## not via `:set`. See the Chromium documentation for more details: - htt
+## ps://chromium.googlesource.com/chromium/src/\+/HEAD/docs/linux/sandbox
+## ing.md[Linux] - https://chromium.googlesource.com/chromium/src/\+/HEAD
+## /docs/design/sandbox.md[Windows] - https://chromium.googlesource.com/c
+## hromium/src/\+/HEAD/docs/design/sandbox_faq.md[FAQ (Windows-centric)]
+## Type: String
+## Valid values:
+##   - enable-all: Enable all available sandboxing mechanisms.
+##   - disable-seccomp-bpf: Disable the Seccomp BPF filter sandbox (Linux only).
+##   - disable-all: Disable all sandboxing (**not recommended!**).
+# c.qt.chromium.sandboxing = 'enable-all'

 
 ## Additional environment variables to set. Setting an environment
 ## variable to null/None will unset it.
 
 ## Additional environment variables to set. Setting an environment
 ## variable to null/None will unset it.


@@ -1134,26 +1367,24 @@ c.qt.args = [str('proxy-pac-url=file://' / config.configdir / 'proxy.pac')]
 ## Type: Bool
 # c.qt.highdpi = False
 
 ## Type: Bool
 # c.qt.highdpi = False
 

-## When to use Chromium's low-end device mode. This improves the RAM
-## usage of renderer processes, at the expense of performance.
-## Type: String
-## Valid values:
-##   - always: Always use low-end device mode.
-##   - auto: Decide automatically (uses low-end mode with < 1 GB available RAM).
-##   - never: Never use low-end device mode.
-# c.qt.low_end_device_mode = 'auto'
+## Work around locale parsing issues in QtWebEngine 5.15.3. With some
+## locales, QtWebEngine 5.15.3 is unusable without this workaround. In
+## affected scenarios, QtWebEngine will log "Network service crashed,
+## restarting service." and only display a blank page. However, It is
+## expected that distributions shipping QtWebEngine 5.15.3 follow up with
+## a proper fix soon, so it is disabled by default.
+## Type: Bool
+# c.qt.workarounds.locale = False

 
 

-## Which Chromium process model to use. Alternative process models use
-## less resources, but decrease security and robustness. See the
-## following pages for more details:    -
-## https://www.chromium.org/developers/design-documents/process-models
-## - https://doc.qt.io/qt-5/qtwebengine-features.html#process-models
-## Type: String
-## Valid values:
-##   - process-per-site-instance: Pages from separate sites are put into separate processes and separate visits to the same site are also isolated.
-##   - process-per-site: Pages from separate sites are put into separate processes. Unlike Process per Site Instance, all visits to the same site will share an OS process. The benefit of this model is reduced memory consumption, because more web pages will share processes. The drawbacks include reduced security, robustness, and responsiveness.
-##   - single-process: Run all tabs in a single process. This should be used for debugging purposes only, and it disables `:open --private`.
-# c.qt.process_model = 'process-per-site-instance'
+## Delete the QtWebEngine Service Worker directory on every start. This
+## workaround can help with certain crashes caused by an unknown
+## QtWebEngine bug related to Service Workers. Those crashes happen
+## seemingly immediately on Windows; after one hour of operation on other
+## systems. Note however that enabling this option *can lead to data
+## loss* on some pages (as Service Worker data isn't persisted) and will
+## negatively impact start-up time.
+## Type: Bool
+# c.qt.workarounds.remove_service_workers = False

 
 ## When/how to show the scrollbar.
 ## Type: String
 
 ## When/how to show the scrollbar.
 ## Type: String


@@ -1187,6 +1418,11 @@ c.qt.args = [str('proxy-pac-url=file://' / config.configdir / 'proxy.pac')]
 ## Type: Bool
 # c.search.wrap = True
 
 ## Type: Bool
 # c.search.wrap = True
 

+## Display messages when advancing through text matches at the top and
+## bottom of the page, e.g. `Search hit TOP`.
+## Type: Bool
+# c.search.wrap_messages = True
+

 ## Name of the session to save by default. If this is set to null, the
 ## session which was last loaded is saved.
 ## Type: SessionName
 ## Name of the session to save by default. If this is set to null, the
 ## session which was last loaded is saved.
 ## Type: SessionName


@@ -1194,7 +1430,7 @@ c.qt.args = [str('proxy-pac-url=file://' / config.configdir / 'proxy.pac')]
 
 ## Load a restored tab as soon as it takes focus.
 ## Type: Bool
 
 ## Load a restored tab as soon as it takes focus.
 ## Type: Bool

-c.session.lazy_restore = True
+# c.session.lazy_restore = False

 
 ## Whether to automatically save a session when it is closed.
 ## Type: Bool
 
 ## Whether to automatically save a session when it is closed.
 ## Type: Bool


@@ -1276,16 +1512,19 @@ c.spellcheck.languages = ['en-GB']
 # c.statusbar.show = 'always'
 
 ## List of widgets displayed in the statusbar.
 # c.statusbar.show = 'always'
 
 ## List of widgets displayed in the statusbar.

-## Type: List of String
+## Type: List of StatusbarWidget

 ## Valid values:
 ##   - url: Current page URL.
 ##   - scroll: Percentage of the current page position like `10%`.
 ##   - scroll_raw: Raw percentage of the current page position like `10`.
 ##   - history: Display an arrow when possible to go back/forward in history.
 ## Valid values:
 ##   - url: Current page URL.
 ##   - scroll: Percentage of the current page position like `10%`.
 ##   - scroll_raw: Raw percentage of the current page position like `10`.
 ##   - history: Display an arrow when possible to go back/forward in history.

+##   - search_match: A match count when searching, e.g. `Match [2/10]`.

 ##   - tabs: Current active tab, e.g. `2`.
 ##   - keypress: Display pressed keys when composing a vi command.
 ##   - progress: Progress bar for the current page loading.
 ##   - tabs: Current active tab, e.g. `2`.
 ##   - keypress: Display pressed keys when composing a vi command.
 ##   - progress: Progress bar for the current page loading.

-# c.statusbar.widgets = ['keypress', 'url', 'scroll', 'history', 'tabs', 'progress']
+##   - text:foo: Display the static text after the colon, `foo` in the example.
+##   - clock: Display current time. The format can be changed by adding a format string via `clock:...`. For supported format strings, see https://docs.python.org/3/library/datetime.html#strftime-and-strptime-format-codes[the Python datetime documentation].
+# c.statusbar.widgets = ['keypress', 'search_match', 'url', 'scroll', 'history', 'tabs', 'progress']

 
 ## Open new tabs (middleclick/ctrl+click) in the background.
 ## Type: Bool
 
 ## Open new tabs (middleclick/ctrl+click) in the background.
 ## Type: Bool


@@ -1455,6 +1694,15 @@ c.tabs.select_on_remove = 'prev'
 ##   - center
 # c.tabs.title.alignment = 'left'
 
 ##   - center
 # c.tabs.title.alignment = 'left'
 

+## Position of ellipsis in truncated title of tabs.
+## Type: ElidePosition
+## Valid values:
+##   - left
+##   - right
+##   - middle
+##   - none
+# c.tabs.title.elide = 'right'
+

 ## Format to use for the tab title. The following placeholders are
 ## defined:
 ##   * `{perc}`: Percentage as a string like `[10%]`.
 ## Format to use for the tab title. The following placeholders are
 ## defined:
 ##   * `{perc}`: Percentage as a string like `[10%]`.


@@ -1463,6 +1711,7 @@ c.tabs.select_on_remove = 'prev'
 ##   * `{title_sep}`: The string `" - "` if a title is set, empty otherwise.
 ##   * `{index}`: Index of this tab.
 ##   * `{aligned_index}`: Index of this tab padded with spaces to have the same width.
 ##   * `{title_sep}`: The string `" - "` if a title is set, empty otherwise.
 ##   * `{index}`: Index of this tab.
 ##   * `{aligned_index}`: Index of this tab padded with spaces to have the same width.

+##   * `{relative_index}`: Index of this tab relative to the current tab.

 ##   * `{id}`: Internal tab ID of this tab.
 ##   * `{scroll_pos}`: Page scroll position.
 ##   * `{host}`: Host of the current web page.
 ##   * `{id}`: Internal tab ID of this tab.
 ##   * `{scroll_pos}`: Page scroll position.
 ##   * `{host}`: Host of the current web page.


@@ -1510,7 +1759,7 @@ c.tabs.select_on_remove = 'prev'
 ## Page to open if :open -t/-b/-w is used without URL. Use `about:blank`
 ## for a blank page.
 ## Type: FuzzyUrl
 ## Page to open if :open -t/-b/-w is used without URL. Use `about:blank`
 ## for a blank page.
 ## Type: FuzzyUrl

-c.url.default_page = 'https://duckduckgo.com/?t=chakra'
+# c.url.default_page = 'https://start.duckduckgo.com/'

 
 ## URL segments where `:navigate increment/decrement` will search for a
 ## number.
 
 ## URL segments where `:navigate increment/decrement` will search for a
 ## number.


@@ -1548,10 +1797,16 @@ c.url.default_page = 'https://duckduckgo.com/?t=chakra'
 ## the search engine name to the search term, e.g. `:open google
 ## qutebrowser`.
 ## Type: Dict
 ## the search engine name to the search term, e.g. `:open google
 ## qutebrowser`.
 ## Type: Dict

-c.url.searchengines = {'DEFAULT': 'https://duckduckgo.com/?t=chakra&q={}',
-                       'ddg':     'https://duckduckgo.com/?t=chakra&q={}',
-                       'slack':   'https://focalpointpositioning.slack.com/messages/{}',
-                       'std':     'http://en.cppreference.com/mwiki/index.php?title=Special%3ASearch&search={}',
+c.url.searchengines = {'DEFAULT':        'https://duckduckgo.com/?t=chakra&q={}',
+                       'ddg':            'https://duckduckgo.com/?t=chakra&q={}',
+                       'cdda':           'https://nornagon.github.io/cdda-guide/?v=0.F-2#/search/{}',
+                       'std':            'http://en.cppreference.com/mwiki/index.php?title=Special%3ASearch&search={}',
+                       'hoogle':         'https://hoogle.haskell.org/?hoogle={}',
+                       'h':              'https://hoogle.haskell.org/?hoogle={}',
+                       'fpp/slack':      'https://focalpointpositioning.slack.com/messages/{}',
+                       'fpp/confluence': 'https://fppnt.atlassian.net/wiki/search?text={}',
+                       'evk':            'https://gitlab.com/search?&scope=issues&group_id=13301433&search={}',
+                       'dev':            'https://devdocs.io/#q={}',

                       }
 
 ## Page(s) to open at the start.
                       }
 
 ## Page(s) to open at the start.


@@ -1675,11 +1930,11 @@ config.bind('J', 'tab-prev')
 # config.bind('PP', 'open -t -- {primary}')
 # config.bind('Pp', 'open -t -- {clipboard}')
 # config.bind('R', 'reload -f')
 # config.bind('PP', 'open -t -- {primary}')
 # config.bind('Pp', 'open -t -- {clipboard}')
 # config.bind('R', 'reload -f')

-# config.bind('Sb', 'open qute://bookmarks#bookmarks')
-# config.bind('Sh', 'open qute://history')
-# config.bind('Sq', 'open qute://bookmarks')
-# config.bind('Ss', 'open qute://settings')
-# config.bind('T', 'tab-focus')
+# config.bind('Sb', 'bookmark-list --jump')
+# config.bind('Sh', 'history')
+# config.bind('Sq', 'bookmark-list')
+# config.bind('Ss', 'set')
+# config.bind('T', 'set-cmd-text -sr :tab-focus')

 # config.bind('U', 'undo -w')
 # config.bind('V', 'mode-enter caret ;; selection-toggle --line')
 # config.bind('ZQ', 'quit')
 # config.bind('U', 'undo -w')
 # config.bind('V', 'mode-enter caret ;; selection-toggle --line')
 # config.bind('ZQ', 'quit')


@@ -1710,15 +1965,17 @@ config.bind('co', 'download-open')
 # config.bind('gf', 'view-source')
 # config.bind('gg', 'scroll-to-perc 0')
 # config.bind('gi', 'hint inputs --first')
 # config.bind('gf', 'view-source')
 # config.bind('gg', 'scroll-to-perc 0')
 # config.bind('gi', 'hint inputs --first')

+config.bind('gl', 'tab-move -')

 # config.bind('gm', 'tab-move')
 # config.bind('go', 'set-cmd-text :open {url:pretty}')
 # config.bind('gm', 'tab-move')
 # config.bind('go', 'set-cmd-text :open {url:pretty}')

+config.bind('gr', 'tab-move +')
+# config.bind('gt', 'set-cmd-text -s :tab-select')

 # config.bind('gu', 'navigate up')
 # config.bind('h', 'scroll left')
 # config.bind('i', 'mode-enter insert')
 # config.bind('j', 'scroll down')
 # config.bind('k', 'scroll up')
 # config.bind('l', 'scroll right')
 # config.bind('gu', 'navigate up')
 # config.bind('h', 'scroll left')
 # config.bind('i', 'mode-enter insert')
 # config.bind('j', 'scroll down')
 # config.bind('k', 'scroll up')
 # config.bind('l', 'scroll right')

-# config.bind('m', 'quickmark-save')

 config.bind('m', 'spawn mpv {url}')
 # config.bind('n', 'search-next')
 # config.bind('o', 'set-cmd-text -s :open')
 config.bind('m', 'spawn mpv {url}')
 # config.bind('n', 'search-next')
 # config.bind('o', 'set-cmd-text -s :open')


@@ -1730,8 +1987,9 @@ config.bind('m', 'spawn mpv {url}')
 # config.bind('sk', 'set-cmd-text -s :bind')
 # config.bind('sl', 'set-cmd-text -s :set -t')
 # config.bind('ss', 'set-cmd-text -s :set')
 # config.bind('sk', 'set-cmd-text -s :bind')
 # config.bind('sl', 'set-cmd-text -s :set -t')
 # config.bind('ss', 'set-cmd-text -s :set')

-config.bind('tCh', 'spawn --userscript config-cycle-tld -p    content.cookies.accept no-3rdparty never;; reload')
-config.bind('tch', 'spawn --userscript config-cycle-tld -p -t content.cookies.accept no-3rdparty never;; reload')
+config.bind('sq', 'quickmark-save')
+config.bind('tCh', 'spawn --userscript config-cycle-tld -p    content.cookies.accept no-3rdparty never all;; reload')
+config.bind('tch', 'spawn --userscript config-cycle-tld -p -t content.cookies.accept no-3rdparty never all;; reload')

 config.bind('tGh', 'spawn --userscript config-cycle-tld -p    content.geolocation ;; reload')
 config.bind('tgh', 'spawn --userscript config-cycle-tld -p -t content.geolocation ;; reload')
 # config.bind('tIH', 'config-cycle -p -u *://*.{url:host}/* content.images ;; reload')
 config.bind('tGh', 'spawn --userscript config-cycle-tld -p    content.geolocation ;; reload')
 config.bind('tgh', 'spawn --userscript config-cycle-tld -p -t content.geolocation ;; reload')
 # config.bind('tIH', 'config-cycle -p -u *://*.{url:host}/* content.images ;; reload')


@@ -1787,6 +2045,11 @@ config.bind('tgh', 'spawn --userscript config-cycle-tld -p -t content.geolocatio
 config.bind('zl',  'spawn --userscript qute-pass')
 config.bind('zul', 'spawn --userscript qute-pass --username-only')
 config.bind('zpl', 'spawn --userscript qute-pass --password-only')
 config.bind('zl',  'spawn --userscript qute-pass')
 config.bind('zul', 'spawn --userscript qute-pass --username-only')
 config.bind('zpl', 'spawn --userscript qute-pass --password-only')

+config.bind('zol', 'spawn --userscript qute-pass --otp-only')
+config.bind('zal', 'spawn --userscript qute-pass --unfiltered')
+config.bind('zaul', 'spawn --userscript qute-pass --unfiltered --username-only')
+config.bind('zapl', 'spawn --userscript qute-pass --unfiltered --password-only')
+config.bind('zaol', 'spawn --userscript qute-pass --unfiltered --otp-only')

 # config.bind('{{', 'navigate prev -t')
 # config.bind('}}', 'navigate next -t')
 
 # config.bind('{{', 'navigate prev -t')
 # config.bind('}}', 'navigate next -t')
 


@@ -1840,9 +2103,10 @@ config.bind('zpl', 'spawn --userscript qute-pass --password-only')
 # config.bind('<Ctrl-Return>', 'command-accept --rapid', mode='command')
 # config.bind('<Ctrl-Shift-C>', 'completion-item-yank --sel', mode='command')
 # config.bind('<Ctrl-Shift-Tab>', 'completion-item-focus prev-category', mode='command')
 # config.bind('<Ctrl-Return>', 'command-accept --rapid', mode='command')
 # config.bind('<Ctrl-Shift-C>', 'completion-item-yank --sel', mode='command')
 # config.bind('<Ctrl-Shift-Tab>', 'completion-item-focus prev-category', mode='command')

+# config.bind('<Ctrl-Shift-W>', 'rl-filename-rubout', mode='command')

 # config.bind('<Ctrl-Tab>', 'completion-item-focus next-category', mode='command')
 # config.bind('<Ctrl-U>', 'rl-unix-line-discard', mode='command')
 # config.bind('<Ctrl-Tab>', 'completion-item-focus next-category', mode='command')
 # config.bind('<Ctrl-U>', 'rl-unix-line-discard', mode='command')

-# config.bind('<Ctrl-W>', 'rl-unix-word-rubout', mode='command')
+# config.bind('<Ctrl-W>', 'rl-rubout " "', mode='command')

 # config.bind('<Ctrl-Y>', 'rl-yank', mode='command')
 # config.bind('<Down>', 'completion-item-focus --history next', mode='command')
 # config.bind('<Escape>', 'mode-leave', mode='command')
 # config.bind('<Ctrl-Y>', 'rl-yank', mode='command')
 # config.bind('<Down>', 'completion-item-focus --history next', mode='command')
 # config.bind('<Escape>', 'mode-leave', mode='command')


@@ -1864,6 +2128,7 @@ config.bind('zpl', 'spawn --userscript qute-pass --password-only')
 ## Bindings for insert mode
 # config.bind('<Ctrl-E>', 'edit-text', mode='insert')
 # config.bind('<Escape>', 'mode-leave', mode='insert')
 ## Bindings for insert mode
 # config.bind('<Ctrl-E>', 'edit-text', mode='insert')
 # config.bind('<Escape>', 'mode-leave', mode='insert')

+# config.bind('<Shift-Escape>', 'fake-key <Escape>', mode='insert')

 # config.bind('<Shift-Ins>', 'insert-text -- {primary}', mode='insert')
 
 ## Bindings for passthrough mode
 # config.bind('<Shift-Ins>', 'insert-text -- {primary}', mode='insert')
 
 ## Bindings for passthrough mode


@@ -1873,6 +2138,7 @@ config.bind('zpl', 'spawn --userscript qute-pass --password-only')
 # config.bind('<Alt-B>', 'rl-backward-word', mode='prompt')
 # config.bind('<Alt-Backspace>', 'rl-backward-kill-word', mode='prompt')
 # config.bind('<Alt-D>', 'rl-kill-word', mode='prompt')
 # config.bind('<Alt-B>', 'rl-backward-word', mode='prompt')
 # config.bind('<Alt-Backspace>', 'rl-backward-kill-word', mode='prompt')
 # config.bind('<Alt-D>', 'rl-kill-word', mode='prompt')

+# config.bind('<Alt-E>', 'prompt-fileselect-external', mode='prompt')

 # config.bind('<Alt-F>', 'rl-forward-word', mode='prompt')
 # config.bind('<Alt-Shift-Y>', 'prompt-yank --sel', mode='prompt')
 # config.bind('<Alt-Y>', 'prompt-yank', mode='prompt')
 # config.bind('<Alt-F>', 'rl-forward-word', mode='prompt')
 # config.bind('<Alt-Shift-Y>', 'prompt-yank --sel', mode='prompt')
 # config.bind('<Alt-Y>', 'prompt-yank', mode='prompt')


@@ -1884,8 +2150,9 @@ config.bind('zpl', 'spawn --userscript qute-pass --password-only')
 # config.bind('<Ctrl-H>', 'rl-backward-delete-char', mode='prompt')
 # config.bind('<Ctrl-K>', 'rl-kill-line', mode='prompt')
 # config.bind('<Ctrl-P>', 'prompt-open-download --pdfjs', mode='prompt')
 # config.bind('<Ctrl-H>', 'rl-backward-delete-char', mode='prompt')
 # config.bind('<Ctrl-K>', 'rl-kill-line', mode='prompt')
 # config.bind('<Ctrl-P>', 'prompt-open-download --pdfjs', mode='prompt')

+# config.bind('<Ctrl-Shift-W>', 'rl-filename-rubout', mode='prompt')

 # config.bind('<Ctrl-U>', 'rl-unix-line-discard', mode='prompt')
 # config.bind('<Ctrl-U>', 'rl-unix-line-discard', mode='prompt')

-# config.bind('<Ctrl-W>', 'rl-unix-word-rubout', mode='prompt')
+# config.bind('<Ctrl-W>', 'rl-rubout " "', mode='prompt')

 # config.bind('<Ctrl-X>', 'prompt-open-download', mode='prompt')
 # config.bind('<Ctrl-Y>', 'rl-yank', mode='prompt')
 # config.bind('<Down>', 'prompt-item-focus next', mode='prompt')
 # config.bind('<Ctrl-X>', 'prompt-open-download', mode='prompt')
 # config.bind('<Ctrl-Y>', 'rl-yank', mode='prompt')
 # config.bind('<Down>', 'prompt-item-focus next', mode='prompt')