# Configfile for qutebrowser.
#
-# WARNING:
-#
-# This config file will be OVERWRITTEN when closing qutebrowser.
-# Close qutebrowser before changing this file, or YOUR CHANGES WILL BE LOST.
-#
# This configfile is parsed by python's configparser in extended
# interpolation mode. The format is very INI-like, so there are
# categories like [general] with "key = value"-pairs.
# Interpolation looks like ${value} or ${section:value} and will be
# replaced by the respective value.
#
+# Some settings will expand environment variables. Note that, since
+# interpolation is run first, you will need to escape the $ char as
+# described below.
+#
# This is the default config, so if you want to remove anything from
-# here (as opposed to change/add), for example a keybinding, set it to
+# here (as opposed to change/add), for example a key binding, set it to
# an empty value.
#
# You will need to escape the following values:
# - # at the start of the line (at the first position of the key) (\#)
# - $ in a value ($$)
-[general]
+
# General/miscellaneous options.
-#
-# ignore-case (bool):
+[general]
+
+# ignore-case (IgnoreCase):
# Whether to find text on a page case-insensitively.
# true: Search case-insensitively
# false: Search case-sensitively
# smart: Search case-sensitively if there are capital chars
# Default: smart
-#
-# wrap-search (bool):
-# Whether to wrap finding text to the top when arriving at the end.
-# Valid values: true, false
-# Default: true
-#
-# startpage (string-list):
+ignore-case = smart
+
+# startpage (List of String):
# The default page(s) to open at the start, separated by commas.
-# Default: https://www.duckduckgo.com
-#
-# auto-search:
+# Default: https://start.duckduckgo.com
+startpage = https://duckduckgo.com/?t=chakra
+
+# yank-ignored-url-parameters (List of String):
+# The URL parameters to strip with :yank url, separated by commas.
+# Default:
+# ref,utm_source,utm_medium,utm_campaign,utm_term,utm_content
+yank-ignored-url-parameters = ref,utm_source,utm_medium,utm_campaign,utm_term,utm_content
+
+# default-open-dispatcher (String):
+# The default program used to open downloads. Set to an empty string
+# to use the default internal handler.
+# Any {} in the string will be expanded to the filename, else the
+# filename will be appended.
+# Default:
+default-open-dispatcher = rifle
+
+# default-page (FuzzyUrl):
+# The page to open if :open -t/-b/-w is used without URL. Use
+# `about:blank` for a blank page.
+# Default: ${startpage}
+default-page = ${startpage}
+
+# auto-search (AutoSearch):
# Whether to start a search when something else than a URL is
# entered.
# naive: Use simple/naive check.
# dns: Use DNS requests (might be slow!).
# false: Never search automatically.
# Default: naive
-#
-# auto-save-config (bool):
+auto-search = naive
+
+# auto-save-config (Bool):
# Whether to save the config automatically on quit.
# Valid values: true, false
# Default: true
-#
-# editor (shell-command):
+auto-save-config = true
+
+# auto-save-interval (Int):
+# How often (in milliseconds) to auto-save config/cookies/etc.
+# Default: 15000
+auto-save-interval = 15000
+
+# editor (ShellCommand):
# The editor (and arguments) to use for the `open-editor` command.
-# Use `{}` for the filename. The value gets split like in a shell,
-# so you can use `"` or `'` to quote arguments.
+# The arguments get split like in a shell, so you can use `"` or `'`
+# to quote them.
+# `{}` gets replaced by the filename of the file to be edited.
# Default: gvim -f "{}"
-#
-# editor-encoding (encoding):
+editor = urxvt -e vim "{}"
+
+# editor-encoding (Encoding):
# Encoding to use for editor.
# Default: utf-8
-#
-# private-browsing (bool):
-# Do not record visited pages in the history or store web page
-# icons.
+editor-encoding = utf-8
+
+# private-browsing (Bool):
+# Open new windows in private browsing mode which does not record
+# visited pages.
# Valid values: true, false
# Default: false
-#
-# developer-extras (bool):
+private-browsing = false
+
+# developer-extras (Bool):
# Enable extra tools for Web developers.
# This needs to be enabled for `:inspector` to work and also adds an
-# _Inspect_ entry to the context menu.
+# _Inspect_ entry to the context menu. For QtWebEngine, see
+# 'qutebrowser --help' instead.
# Valid values: true, false
# Default: false
-#
-# print-element-backgrounds (bool):
+developer-extras = true
+
+# print-element-backgrounds (Bool):
# Whether the background color and images are also drawn when the
# page is printed.
+# This setting only works with Qt 5.8 or newer when using the
+# QtWebEngine backend.
# Valid values: true, false
# Default: true
-#
-# xss-auditing (bool):
+print-element-backgrounds = true
+
+# xss-auditing (Bool):
# Whether load requests should be monitored for cross-site scripting
# attempts.
# Suspicious scripts will be blocked and reported in the inspector's
# performance.
# Valid values: true, false
# Default: false
-#
-# site-specific-quirks (bool):
-# Enable workarounds for broken sites.
-# Valid values: true, false
-# Default: true
-#
-# default-encoding (string):
+xss-auditing = false
+
+# default-encoding (String):
# Default encoding to use for websites.
# The encoding must be a string describing an encoding such as
-# _utf-8_, _iso-8859-1_, etc. If left empty a default value will be
-# used.
-# Default:
-#
-# new-instance-open-target:
+# _utf-8_, _iso-8859-1_, etc.
+# Default: iso-8859-1
+default-encoding = iso-8859-1
+
+# new-instance-open-target (String):
# How to open links in an existing instance if a new one is
# launched.
-# tab: Open a new tab in the existing window and activate it.
+# tab: Open a new tab in the existing window and activate the
+# window.
+# tab-bg: Open a new background tab in the existing window and
+# activate the window.
# tab-silent: Open a new tab in the existing window without
-# activating it.
+# activating the window.
+# tab-bg-silent: Open a new background tab in the existing
+# window without activating the window.
# window: Open in a new window.
-# Default: window
-ignore-case = smart
-wrap-search = true
-startpage = https://www.duckduckgo.com
-auto-search = naive
-auto-save-config = true
-editor = urxvt -e vim "{}"
-editor-encoding = utf-8
-private-browsing = false
-developer-extras = true
-print-element-backgrounds = true
-xss-auditing = false
-site-specific-quirks = true
-default-encoding =
+# Default: tab
new-instance-open-target = tab
-[ui]
+# new-instance-open-target.window (String):
+# Which window to choose when opening links as new tabs.
+# first-opened: Open new tabs in the first (oldest) opened
+# window.
+# last-opened: Open new tabs in the last (newest) opened window.
+# last-focused: Open new tabs in the most recently focused
+# window.
+# last-visible: Open new tabs in the most recently visible
+# window.
+# Default: last-focused
+new-instance-open-target.window = last-focused
+
+# log-javascript-console (String):
+# How to log javascript console messages.
+# none: Don't log messages.
+# debug: Log messages with debug level.
+# info: Log messages with info level.
+# Default: debug
+log-javascript-console = none
+
+# save-session (Bool):
+# Whether to always save the open pages.
+# Valid values: true, false
+# Default: false
+save-session = true
+
+# session-default-name (SessionName):
+# The name of the session to save by default, or empty for the last
+# loaded session.
+# Default:
+session-default-name =
+
+# url-incdec-segments (FlagList):
+# The URL segments where `:navigate increment/decrement` will search
+# for a number.
+# Valid values: host, path, query, anchor
+# Default: path,query
+url-incdec-segments = path,query
+
+
# General options related to the user interface.
-#
-# zoom-levels (perc-list):
+[ui]
+
+# history-session-interval (Int):
+# The maximum time in minutes between two history items for them to
+# be considered being from the same session. Use -1 to disable
+# separation.
+# Default: 30
+history-session-interval = 30
+
+# zoom-levels (List of Perc):
# The available zoom levels, separated by commas.
# Default:
# 25%,33%,50%,67%,75%,90%,100%,110%,125%,150%,175%,200%,250%,300%,400%,500%
-#
-# default-zoom (percentage):
+zoom-levels = 25%,33%,50%,67%,75%,90%,100%,110%,125%,150%,175%,200%,250%,300%,400%,500%
+
+# default-zoom (Perc):
# The default zoom level.
# Default: 100%
-#
-# message-timeout (int):
+default-zoom = 100%
+
+# downloads-position (VerticalPosition):
+# Where to show the downloaded files.
+# Valid values: top, bottom
+# Default: top
+downloads-position = top
+
+# status-position (VerticalPosition):
+# The position of the status bar.
+# Valid values: top, bottom
+# Default: bottom
+status-position = bottom
+
+# message-timeout (Int):
# Time (in ms) to show messages in the statusbar for.
+# Set to 0 to never clear messages.
# Default: 2000
-#
-# confirm-quit (string-list):
+message-timeout = 2000
+
+# message-unfocused (Bool):
+# Whether to show messages in unfocused windows.
+# Valid values: true, false
+# Default: false
+message-unfocused = false
+
+# confirm-quit (ConfirmQuit):
# Whether to confirm quitting the application.
# always: Always show a confirmation.
# multiple-tabs: Show a confirmation if multiple tabs are
# downloads: Show a confirmation if downloads are running
# never: Never show a confirmation.
# Default: never
-#
-# display-statusbar-messages (bool):
-# Whether to display javascript statusbar messages.
-# Valid values: true, false
-# Default: false
-#
-# zoom-text-only (bool):
+confirm-quit = downloads
+
+# zoom-text-only (Bool):
# Whether the zoom factor on a frame applies only to the text or to
# all content.
# Valid values: true, false
# Default: false
-#
-# frame-flattening (bool):
+zoom-text-only = false
+
+# frame-flattening (Bool):
# Whether to expand each subframe to its contents.
# This will flatten all the frames to become one scrollable page.
# Valid values: true, false
# Default: false
-#
-# user-stylesheet (user-stylesheet):
-# User stylesheet to use (absolute filename or CSS string).
-# Default: ::-webkit-scrollbar { width: 0px; height: 0px; }
-#
-# css-media-type (string):
-# Set the CSS media type.
+frame-flattening = false
+
+# user-stylesheet (File):
+# User stylesheet to use (absolute filename or filename relative to
+# the config directory). Will expand environment variables.
# Default:
-#
-# remove-finished-downloads (bool):
-# Whether to remove finished downloads automatically.
+user-stylesheet =
+
+# hide-scrollbar (Bool):
+# Hide the main scrollbar.
+# Valid values: true, false
+# Default: true
+hide-scrollbar = true
+
+# smooth-scrolling (Bool):
+# Whether to enable smooth scrolling for web pages. Note smooth
+# scrolling does not work with the :scroll-px command.
# Valid values: true, false
# Default: false
-zoom-levels = 25%,33%,50%,67%,75%,90%,100%,110%,125%,150%,175%,200%,250%,300%,400%,500%
-default-zoom = 100%
-message-timeout = 2000
-confirm-quit = downloads
-display-statusbar-messages = false
-zoom-text-only = false
-frame-flattening = false
-user-stylesheet = ::-webkit-scrollbar { width: 0px; height: 0px; }
-css-media-type =
-remove-finished-downloads = false
+smooth-scrolling = false
+
+# remove-finished-downloads (Int):
+# Number of milliseconds to wait before removing finished downloads.
+# Will not be removed if value is -1.
+# Default: -1
+remove-finished-downloads = -1
+
+# hide-statusbar (Bool):
+# Whether to hide the statusbar unless a message is shown.
+# Valid values: true, false
+# Default: false
+hide-statusbar = false
+
+# statusbar-padding (Padding):
+# Padding for statusbar (top, bottom, left, right).
+# Default: 1,1,0,0
+statusbar-padding = 1,1,0,0
+
+# window-title-format (FormatString):
+# The format to use for the window title. The following placeholders
+# are defined:
+# * `{perc}`: The percentage as a string like `[10%]`.
+# * `{perc_raw}`: The raw percentage, e.g. `10`
+# * `{title}`: The title of the current web page
+# * `{title_sep}`: The string ` - ` if a title is set, empty
+# otherwise.
+# * `{id}`: The internal window ID of this window.
+# * `{scroll_pos}`: The page scroll position.
+# * `{host}`: The host of the current web page.
+# * `{backend}`: Either 'webkit' or 'webengine'
+# * `{private}` : Indicates when private mode is enabled.
+# Default: {perc}{title}{title_sep}qutebrowser
+window-title-format = {perc}{title}{title_sep}qutebrowser
+
+# modal-js-dialog (Bool):
+# Use standard JavaScript modal dialog for alert() and confirm()
+# Valid values: true, false
+# Default: false
+modal-js-dialog = false
+
+# hide-wayland-decoration (Bool):
+# Hide the window decoration when using wayland (requires restart)
+# Valid values: true, false
+# Default: false
+hide-wayland-decoration = false
+
+# keyhint-blacklist (List of String):
+# Keychains that shouldn't be shown in the keyhint dialog
+# Globs are supported, so ';*' will blacklist all keychainsstarting
+# with ';'. Use '*' to disable keyhints
+# Default:
+keyhint-blacklist =
+
+# keyhint-delay (Int):
+# Time from pressing a key to seeing the keyhint dialog (ms)
+# Default: 500
+keyhint-delay = 500
+
+# prompt-radius (Int):
+# The rounding radius for the edges of prompts.
+# Default: 8
+prompt-radius = 8
+
+# prompt-filebrowser (Bool):
+# Show a filebrowser in upload/download prompts.
+# Valid values: true, false
+# Default: true
+prompt-filebrowser = true
+
-[network]
# Settings related to the network.
-#
-# do-not-track (bool):
+[network]
+
+# do-not-track (Bool):
# Value to send in the `DNT` header.
# Valid values: true, false
# Default: true
-#
-# accept-language (string):
+do-not-track = true
+
+# accept-language (String):
# Value to send in the `accept-language` header.
# Default: en-US,en
-#
-# user-agent (string):
+accept-language = en-US,en,de,fr
+
+# referer-header (String):
+# Send the Referer header
+# always: Always send.
+# never: Never send; this is not recommended, as some sites may
+# break.
+# same-domain: Only send for the same domain. This will still
+# protect your privacy, but shouldn't break any sites.
+# Default: same-domain
+referer-header = same-domain
+
+# user-agent (UserAgent):
# User agent to send. Empty to send the default.
# Default:
-#
-# proxy:
+user-agent =
+
+# proxy (Proxy):
# The proxy to use.
# In addition to the listed values, you can use a `socks://...` or
# `http://...` URL.
# system: Use the system wide proxy.
# none: Don't use any proxy
# Default: system
-#
-# proxy-dns-requests (bool):
+proxy = system
+
+# proxy-dns-requests (Bool):
# Whether to send DNS requests over the configured proxy.
# Valid values: true, false
# Default: true
-#
-# ssl-strict (bool):
+proxy-dns-requests = true
+
+# ssl-strict (BoolAsk):
# Whether to validate SSL handshakes.
# Valid values: true, false, ask
# Default: ask
-#
-# dns-prefetch (bool):
+ssl-strict = ask
+
+# dns-prefetch (Bool):
# Whether to try to pre-fetch DNS entries to speed up browsing.
# Valid values: true, false
# Default: true
-do-not-track = true
-accept-language = en-US,en,de,fr
-user-agent =
-proxy = system
-proxy-dns-requests = true
-ssl-strict = ask
dns-prefetch = true
-[completion]
+# custom-headers (HeaderDict):
+# Set custom headers for qutebrowser HTTP requests.
+# Default:
+custom-headers =
+
+# netrc-file (File):
+# Set location of a netrc-file for HTTP authentication. If empty,
+# ~/.netrc is used.
+# Default:
+netrc-file =
+
+
# Options related to completion and command history.
-#
-# show (bool):
-# Whether to show the autocompletion window.
-# Valid values: true, false
-# Default: true
-#
-# height (percentage-or-int):
+[completion]
+
+# show (String):
+# When to show the autocompletion window.
+# always: Whenever a completion is available.
+# auto: Whenever a completion is requested.
+# never: Never.
+# Default: always
+show = always
+
+# download-path-suggestion (String):
+# What to display in the download filename input.
+# path: Show only the download path.
+# filename: Show only download filename.
+# both: Show download path and filename.
+# Default: path
+download-path-suggestion = path
+
+# timestamp-format (TimestampTemplate):
+# How to format timestamps (e.g. for history)
+# Default: %Y-%m-%d
+timestamp-format = %Y-%m-%d
+
+# height (PercOrInt):
# The height of the completion, in px or as percentage of the
# window.
# Default: 50%
-#
-# history-length (int):
-# How many commands to save in the history.
+height = 150
+
+# cmd-history-max-items (Int):
+# How many commands to save in the command history.
# 0: no history / -1: unlimited
# Default: 100
-#
-# quick-complete (bool):
+cmd-history-max-items = 100
+
+# web-history-max-items (Int):
+# How many URLs to show in the web history.
+# 0: no history / -1: unlimited
+# Default: 1000
+web-history-max-items = 1000
+
+# quick-complete (Bool):
# Whether to move on to the next part when there's only one possible
# completion left.
# Valid values: true, false
# Default: true
-#
-# shrink (bool):
+quick-complete = false
+
+# shrink (Bool):
# Whether to shrink the completion to be smaller than the configured
# size if there are no scrollbars.
# Valid values: true, false
# Default: false
-show = true
-height = 150
-history-length = 100
-quick-complete = false
shrink = true
-[input]
+# scrollbar-width (Int):
+# Width of the scrollbar in the completion window (in px).
+# Default: 12
+scrollbar-width = 12
+
+# scrollbar-padding (Int):
+# Padding of scrollbar handle in completion window (in px).
+# Default: 2
+scrollbar-padding = 2
+
+
# Options related to input modes.
-#
-# timeout (int):
-# Timeout for ambiguous keybindings.
+[input]
+
+# timeout (Int):
+# Timeout (in milliseconds) for ambiguous key bindings.
+# If the current input forms both a complete match and a partial
+# match, the complete match will be executed after this time.
# Default: 500
-#
-# insert-mode-on-plugins (bool):
+timeout = 500
+
+# partial-timeout (Int):
+# Timeout (in milliseconds) for partially typed key bindings.
+# If the current input forms only partial matches, the keystring
+# will be cleared after this time.
+# Default: 5000
+partial-timeout = 5000
+
+# insert-mode-on-plugins (Bool):
# Whether to switch to insert mode when clicking flash and other
# plugins.
# Valid values: true, false
# Default: false
-#
-# auto-leave-insert-mode (bool):
+insert-mode-on-plugins = false
+
+# auto-leave-insert-mode (Bool):
# Whether to leave insert mode if a non-editable element is clicked.
# Valid values: true, false
# Default: true
-#
-# auto-insert-mode (bool):
+auto-leave-insert-mode = true
+
+# auto-insert-mode (Bool):
# Whether to automatically enter insert mode if an editable element
# is focused after page load.
# Valid values: true, false
# Default: false
-#
-# forward-unbound-keys:
+auto-insert-mode = false
+
+# forward-unbound-keys (String):
# Whether to forward unbound keys to the webview in normal mode.
# all: Forward all unbound keys.
# auto: Forward unbound non-alphanumeric keys.
# none: Don't forward any keys.
# Default: auto
-#
-# spatial-navigation (bool):
-# Enables or disables the Spatial Navigation feature
+forward-unbound-keys = auto
+
+# spatial-navigation (Bool):
+# Enables or disables the Spatial Navigation feature.
# Spatial navigation consists in the ability to navigate between
# focusable elements in a Web page, such as hyperlinks and form
# controls, by using Left, Right, Up and Down arrow keys. For
# the right and which element he probably wants.
# Valid values: true, false
# Default: false
-#
-# links-included-in-focus-chain (bool):
+spatial-navigation = false
+
+# links-included-in-focus-chain (Bool):
# Whether hyperlinks should be included in the keyboard focus chain.
# Valid values: true, false
# Default: true
-timeout = 500
-insert-mode-on-plugins = false
-auto-leave-insert-mode = true
-auto-insert-mode = false
-forward-unbound-keys = auto
-spatial-navigation = false
links-included-in-focus-chain = true
-[tabs]
+# rocker-gestures (Bool):
+# Whether to enable Opera-like mouse rocker gestures. This disables
+# the context menu.
+# Valid values: true, false
+# Default: false
+rocker-gestures = false
+
+# mouse-zoom-divider (Int):
+# How much to divide the mouse wheel movements to translate them
+# into zoom increments.
+# Default: 512
+mouse-zoom-divider = 512
+
+
# Configuration of the tab bar.
-#
-# background-tabs (bool):
+[tabs]
+
+# background-tabs (Bool):
# Whether to open new tabs (middleclick/ctrl+click) in background.
# Valid values: true, false
# Default: false
-#
-# select-on-remove:
+background-tabs = false
+
+# select-on-remove (SelectOnRemove):
# Which tab to select when the focused tab is removed.
-# left: Select the tab on the left.
-# right: Select the tab on the right.
-# previous: Select the previously selected tab.
-# Default: right
-#
-# new-tab-position:
+# prev: Select the tab which came before the closed one (left in
+# horizontal, above in vertical).
+# next: Select the tab which came after the closed one (right in
+# horizontal, below in vertical).
+# last-used: Select the previously selected tab.
+# Default: next
+select-on-remove = prev
+
+# new-tab-position (NewTabPosition):
# How new tabs are positioned.
-# left: On the left of the current tab.
-# right: On the right of the current tab.
-# first: At the left end.
-# last: At the right end.
-# Default: right
-#
-# new-tab-position-explicit:
-# How new tabs opened explicitely are positioned.
-# left: On the left of the current tab.
-# right: On the right of the current tab.
-# first: At the left end.
-# last: At the right end.
+# prev: Before the current tab.
+# next: After the current tab.
+# first: At the beginning.
+# last: At the end.
+# Default: next
+new-tab-position = next
+
+# new-tab-position-explicit (NewTabPosition):
+# How new tabs opened explicitly are positioned.
+# prev: Before the current tab.
+# next: After the current tab.
+# first: At the beginning.
+# last: At the end.
# Default: last
-#
-# last-close:
-# Behaviour when the last tab is closed.
+new-tab-position-explicit = next
+
+# last-close (String):
+# Behavior when the last tab is closed.
# ignore: Don't do anything.
# blank: Load a blank page.
+# startpage: Load the start page.
+# default-page: Load the default page.
# close: Close the window.
# Default: ignore
-#
-# auto-hide (bool):
-# Hide the tabbar if only one tab is open.
-# Valid values: true, false
-# Default: false
-#
-# wrap (bool):
+last-close = ignore
+
+# show (String):
+# When to show the tab bar
+# always: Always show the tab bar.
+# never: Always hide the tab bar.
+# multiple: Hide the tab bar if only one tab is open.
+# switching: Show the tab bar when switching tabs.
+# Default: always
+show = always
+
+# show-switching-delay (Int):
+# Time to show the tab bar before hiding it when tabs->show is set
+# to 'switching'.
+# Default: 800
+show-switching-delay = 800
+
+# wrap (Bool):
# Whether to wrap when changing tabs.
# Valid values: true, false
# Default: true
-#
-# movable (bool):
+wrap = true
+
+# movable (Bool):
# Whether tabs should be movable.
# Valid values: true, false
# Default: true
-#
-# close-mouse-button:
+movable = true
+
+# close-mouse-button (String):
# On which mouse button to close tabs.
# right: Close tabs on right-click.
# middle: Close tabs on middle-click.
# none: Don't close tabs using the mouse.
# Default: middle
-#
-# position:
+close-mouse-button = middle
+
+# position (Position):
# The position of the tab bar.
-# Valid values: north, south, east, west
-# Default: north
-#
-# show-favicons (bool):
+# Valid values: top, bottom, left, right
+# Default: top
+position = top
+
+# show-favicons (Bool):
# Whether to show favicons in the tab bar.
# Valid values: true, false
# Default: true
-#
-# width (percentage-or-int):
+show-favicons = true
+
+# favicon-scale (Float):
+# Scale for favicons in the tab bar. The tab size is unchanged, so
+# big favicons also require extra `tabs->padding`.
+# Default: 1.0
+favicon-scale = 1.0
+
+# width (PercOrInt):
# The width of the tab bar if it's vertical, in px or as percentage
# of the window.
# Default: 20%
-#
-# indicator-width (int):
+width = 20%
+
+# pinned-width (Int):
+# The width for pinned tabs with a horizontal tabbar, in px.
+# Default: 43
+pinned-width = 43
+
+# indicator-width (Int):
# Width of the progress indicator (0 to disable).
# Default: 3
-#
-# indicator-space (int):
-# Spacing between tab edge and indicator.
-# Default: 3
-#
-# tabs-are-windows (bool):
+indicator-width = 3
+
+# tabs-are-windows (Bool):
# Whether to open windows instead of tabs.
# Valid values: true, false
# Default: false
-background-tabs = false
-select-on-remove = left
-new-tab-position = right
-new-tab-position-explicit = last
-last-close = ignore
-auto-hide = false
-wrap = true
-movable = true
-close-mouse-button = middle
-position = north
-show-favicons = true
-width = 20%
-indicator-width = 3
-indicator-space = 3
tabs-are-windows = false
-[storage]
+# title-format (FormatString):
+# The format to use for the tab title. The following placeholders
+# are defined:
+# * `{perc}`: The percentage as a string like `[10%]`.
+# * `{perc_raw}`: The raw percentage, e.g. `10`
+# * `{title}`: The title of the current web page
+# * `{title_sep}`: The string ` - ` if a title is set, empty
+# otherwise.
+# * `{index}`: The index of this tab.
+# * `{id}`: The internal tab ID of this tab.
+# * `{scroll_pos}`: The page scroll position.
+# * `{host}`: The host of the current web page.
+# * `{backend}`: Either 'webkit' or 'webengine'
+# * `{private}` : Indicates when private mode is enabled.
+# Default: {index}: {title}
+title-format = {index}: {title}
+
+# title-format-pinned (FormatString):
+# The format to use for the tab title for pinned tabs. The same
+# placeholders like for title-format are defined.
+# Default: {index}
+title-format-pinned = {index}
+
+# title-alignment (TextAlignment):
+# Alignment of the text inside of tabs
+# Valid values: left, right, center
+# Default: left
+title-alignment = left
+
+# mousewheel-tab-switching (Bool):
+# Switch between tabs using the mouse wheel.
+# Valid values: true, false
+# Default: true
+mousewheel-tab-switching = true
+
+# padding (Padding):
+# Padding for tabs (top, bottom, left, right).
+# Default: 0,0,5,5
+padding = 0,0,5,5
+
+# indicator-padding (Padding):
+# Padding for indicators (top, bottom, left, right).
+# Default: 2,2,0,4
+indicator-padding = 2,2,0,4
+
+
# Settings related to cache and storage.
-#
-# download-directory (directory):
+[storage]
+
+# download-directory (Directory):
# The directory to save downloads to. An empty value selects a
-# sensible os-specific default.
+# sensible os-specific default. Will expand environment variables.
# Default:
-#
-# maximum-pages-in-cache (int):
-# The maximum number of pages to hold in the memory page cache.
+download-directory = ~/downloads
+
+# prompt-download-directory (Bool):
+# Whether to prompt the user for the download location.
+# If set to false, 'download-directory' will be used.
+# Valid values: true, false
+# Default: true
+prompt-download-directory = true
+
+# remember-download-directory (Bool):
+# Whether to remember the last used download directory.
+# Valid values: true, false
+# Default: true
+remember-download-directory = true
+
+# maximum-pages-in-cache (Int):
+# The maximum number of pages to hold in the global memory page
+# cache.
# The Page Cache allows for a nicer user experience when navigating
# forth or back to pages in the forward/back history, by pausing and
# resuming up to _n_ pages.
# For more information about the feature, please refer to:
# http://webkit.org/blog/427/webkit-page-cache-i-the-basics/
-# Default:
-#
-# object-cache-capacities (bytes-list):
-# The capacities for the memory cache for dead objects such as
-# stylesheets or scripts. Syntax: cacheMinDeadCapacity,
-# cacheMaxDead, totalCapacity.
-# The _cacheMinDeadCapacity_ specifies the minimum number of bytes
-# that dead objects should consume when the cache is under pressure.
-# _cacheMaxDead_ is the maximum number of bytes that dead objects
-# should consume when the cache is *not* under pressure.
-# _totalCapacity_ specifies the maximum number of bytes that the
-# cache should consume *overall*.
-# Default:
-#
-# offline-storage-default-quota (bytes):
-# Default quota for new offline storage databases.
-# Default:
-#
-# offline-web-application-cache-quota (bytes):
-# Quota for the offline web application cache.
-# Default:
-#
-# offline-storage-database (bool):
-# Whether support for the HTML 5 offline storage feature is enabled.
-# Valid values: true, false
-# Default: true
-#
-# offline-web-application-storage (bool):
+# Default: 0
+maximum-pages-in-cache = 0
+
+# offline-web-application-cache (Bool):
# Whether support for the HTML 5 web application cache feature is
# enabled.
# An application cache acts like an HTTP cache in some sense. For
# http://dev.w3.org/html5/spec/Overview.html#appcache
# Valid values: true, false
# Default: true
-#
-# local-storage (bool):
-# Whether support for the HTML 5 local storage feature is enabled.
+offline-web-application-cache = true
+
+# local-storage (Bool):
+# Whether support for HTML 5 local storage and Web SQL is enabled.
# Valid values: true, false
# Default: true
-#
-# cache-size (int):
-# Size of the HTTP network cache.
-# Default: 52428800
-download-directory = ~/downloads
-maximum-pages-in-cache =
-object-cache-capacities =
-offline-storage-default-quota =
-offline-web-application-cache-quota =
-offline-storage-database = true
-offline-web-application-storage = true
local-storage = true
+
+# cache-size (Int):
+# Size of the HTTP network cache. Empty to use the default value.
+# Default:
cache-size = 52428800
-[content]
+
# Loaded plugins/scripts and allowed actions.
-#
-# allow-images (bool):
+[content]
+
+# allow-images (Bool):
# Whether images are automatically loaded in web pages.
# Valid values: true, false
# Default: true
-#
-# allow-javascript (bool):
+allow-images = true
+
+# allow-javascript (Bool):
# Enables or disables the running of JavaScript programs.
# Valid values: true, false
# Default: true
-#
-# allow-plugins (bool):
+allow-javascript = true
+
+# allow-plugins (Bool):
# Enables or disables plugins in Web pages.
# Qt plugins with a mimetype such as "application/x-qt-plugin" are
# not affected by this setting.
# Valid values: true, false
# Default: false
-#
-# javascript-can-open-windows (bool):
-# Whether JavaScript programs can open new windows.
+allow-plugins = false
+
+# webgl (Bool):
+# Enables or disables WebGL.
+# Valid values: true, false
+# Default: true
+webgl = true
+
+# hyperlink-auditing (Bool):
+# Enable or disable hyperlink auditing (<a ping>).
# Valid values: true, false
# Default: false
-#
-# javascript-can-close-windows (bool):
+hyperlink-auditing = false
+
+# geolocation (BoolAsk):
+# Allow websites to request geolocations.
+# Valid values: true, false, ask
+# Default: ask
+geolocation = ask
+
+# notifications (BoolAsk):
+# Allow websites to show notifications.
+# Valid values: true, false, ask
+# Default: ask
+notifications = false
+
+# media-capture (BoolAsk):
+# Allow websites to record audio/video.
+# Valid values: true, false, ask
+# Default: ask
+media-capture = ask
+
+# javascript-can-open-windows-automatically (Bool):
+# Whether JavaScript programs can open new windows without user
+# interaction.
+# Valid values: true, false
+# Default: false
+javascript-can-open-windows-automatically = false
+
+# javascript-can-close-windows (Bool):
# Whether JavaScript programs can close windows.
# Valid values: true, false
# Default: false
-#
-# javascript-can-access-clipboard (bool):
+javascript-can-close-windows = false
+
+# javascript-can-access-clipboard (Bool):
# Whether JavaScript programs can read or write to the clipboard.
+# With QtWebEngine, writing the clipboard as response to a user
+# interaction is always allowed.
# Valid values: true, false
# Default: false
-#
-# local-content-can-access-remote-urls (bool):
+javascript-can-access-clipboard = false
+
+# ignore-javascript-prompt (Bool):
+# Whether all javascript prompts should be ignored.
+# Valid values: true, false
+# Default: false
+ignore-javascript-prompt = false
+
+# ignore-javascript-alert (Bool):
+# Whether all javascript alerts should be ignored.
+# Valid values: true, false
+# Default: false
+ignore-javascript-alert = false
+
+# local-content-can-access-remote-urls (Bool):
# Whether locally loaded documents are allowed to access remote
# urls.
# Valid values: true, false
# Default: false
-#
-# local-content-can-access-file-urls (bool):
+local-content-can-access-remote-urls = false
+
+# local-content-can-access-file-urls (Bool):
# Whether locally loaded documents are allowed to access other local
# urls.
# Valid values: true, false
# Default: true
-#
-# cookies-accept:
-# Whether to accept cookies.
-# default: Default QtWebKit behaviour.
+local-content-can-access-file-urls = true
+
+# cookies-accept (String):
+# Control which cookies to accept.
+# all: Accept all cookies.
+# no-3rdparty: Accept cookies from the same origin only.
+# no-unknown-3rdparty: Accept cookies from the same origin only,
+# unless a cookie is already set for the domain.
# never: Don't accept cookies at all.
-# Default: default
-#
-# cookies-store (bool):
-# Whether to store cookies.
+# Default: no-3rdparty
+cookies-accept = no-3rdparty
+
+# cookies-store (Bool):
+# Whether to store cookies. Note this option needs a restart with
+# QtWebEngine on Qt < 5.9.
# Valid values: true, false
# Default: true
-#
-# host-block-lists (url-list):
+cookies-store = true
+
+# host-block-lists (List of Url):
# List of URLs of lists which contain hosts to block.
# The file can be in one of the following formats:
# - An '/etc/hosts'-like file
# - A zip-file of any of the above, with either only one file, or a
# file named 'hosts' (with any extension).
# Default:
-# http://www.malwaredomainlist.com/hostslist/hosts.txt,http://someonewhocares.org/hosts/hosts,http://winhelp2002.mvps.org/hosts.zip,http://malwaredomains.lehigh.edu/files/justdomains.zip,http://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintext
-allow-images = true
-allow-javascript = true
-allow-plugins = false
-javascript-can-open-windows = true
-javascript-can-close-windows = true
-javascript-can-access-clipboard = false
-local-content-can-access-remote-urls = false
-local-content-can-access-file-urls = true
-cookies-accept = default
-cookies-store = true
+# https://www.malwaredomainlist.com/hostslist/hosts.txt,http://someonewhocares.org/hosts/hosts,http://winhelp2002.mvps.org/hosts.zip,http://malwaredomains.lehigh.edu/files/justdomains.zip,https://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintext
host-block-lists = http://www.malwaredomainlist.com/hostslist/hosts.txt,http://someonewhocares.org/hosts/hosts,http://winhelp2002.mvps.org/hosts.zip,http://malwaredomains.lehigh.edu/files/justdomains.zip,http://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintext
-[hints]
+# host-blocking-enabled (Bool):
+# Whether host blocking is enabled.
+# Valid values: true, false
+# Default: true
+host-blocking-enabled = true
+
+# host-blocking-whitelist (List of String):
+# List of domains that should always be loaded, despite being
+# ad-blocked.
+# Domains may contain * and ? wildcards and are otherwise required
+# to exactly match the requested domain.
+# Local domains are always exempt from hostblocking.
+# Default: piwik.org
+host-blocking-whitelist = piwik.org
+
+# enable-pdfjs (Bool):
+# Enable pdf.js to view PDF files in the browser.
+# Note that the files can still be downloaded by clicking the
+# download button in the pdf.js viewer.
+# Valid values: true, false
+# Default: false
+enable-pdfjs = false
+
+
# Hinting settings.
-#
-# border (string):
+[hints]
+
+# border (String):
# CSS border value for hints.
# Default: 1px solid #E3BE23
-#
-# opacity (float):
-# Opacity for hints.
-# Default: 0.7
-#
-# mode:
+border = 1px solid #E3BE23
+
+# mode (String):
# Mode to use for hints.
-# number: Use numeric hints.
+# number: Use numeric hints. (In this mode you can also type
+# letters form the hinted element to filter and reduce the number of
+# elements that are hinted.)
# letter: Use the chars in the hints -> chars setting.
+# word: Use hints words based on the html elements and the extra
+# words.
# Default: letter
-#
-# chars (string):
+mode = letter
+
+# chars (UniqueCharString):
# Chars used for hint strings.
# Default: asdfghjkl
-#
-# uppercase (bool):
+chars = aoeuidhtns
+
+# min-chars (Int):
+# Minimum number of chars used for hint strings.
+# Default: 1
+min-chars = 2
+
+# scatter (Bool):
+# Whether to scatter hint key chains (like Vimium) or not (like
+# dwb). Ignored for number hints.
+# Valid values: true, false
+# Default: true
+scatter = false
+
+# uppercase (Bool):
# Make chars in hint strings uppercase.
# Valid values: true, false
# Default: false
-#
-# auto-follow (bool):
-# Whether to auto-follow a hint if there's only one left.
-# Valid values: true, false
-# Default: true
-#
-# next-regexes (regex-list):
+uppercase = true
+
+# dictionary (File):
+# The dictionary file to be used by the word hints.
+# Default: /usr/share/dict/words
+dictionary = /usr/share/dict/words
+
+# auto-follow (String):
+# Controls when a hint can be automatically followed without the
+# user pressing Enter.
+# always: Auto-follow whenever there is only a single hint on a
+# page.
+# unique-match: Auto-follow whenever there is a unique non-empty
+# match in either the hint string (word mode) or filter (number
+# mode).
+# full-match: Follow the hint when the user typed the whole hint
+# (letter, word or number mode) or the element's text (only in
+# number mode).
+# never: The user will always need to press Enter to follow a
+# hint.
+# Default: unique-match
+auto-follow = unique-match
+
+# auto-follow-timeout (Int):
+# A timeout (in milliseconds) to inhibit normal-mode key bindings
+# after a successful auto-follow.
+# Default: 0
+auto-follow-timeout = 0
+
+# next-regexes (List of Regex):
# A comma-separated list of regexes to use for 'next' links.
-# Default: \bnext\b,\bmore\b,\bnewer\b,\b[>→≫]\b,\b(>>|»)\b
-#
-# prev-regexes (regex-list):
+# Default:
+# \bnext\b,\bmore\b,\bnewer\b,\b[>→≫]\b,\b(>>|»)\b,\bcontinue\b
+next-regexes = \bnext\b,\bmore\b,\bnewer\b,\b[>→≫]\b,\b(>>|»)\b,\bcontinue\b
+
+# prev-regexes (List of Regex):
# A comma-separated list of regexes to use for 'prev' links.
# Default: \bprev(ious)?\b,\bback\b,\bolder\b,\b[<←≪]\b,\b(<<|«)\b
-border = 1px solid #E3BE23
-opacity = 0.7
-mode = letter
-chars = aoeuidhtns
-uppercase = true
-auto-follow = true
-next-regexes = \bnext\b,\bmore\b,\bnewer\b,\b[>→≫]\b,\b(>>|»)\b
prev-regexes = \bprev(ious)?\b,\bback\b,\bolder\b,\b[<←≪]\b,\b(<<|«)\b
-[searchengines]
+# find-implementation (String):
+# Which implementation to use to find elements to hint.
+# javascript: Better but slower
+# python: Slightly worse but faster
+# Default: python
+find-implementation = javascript
+
+# hide-unmatched-rapid-hints (Bool):
+# Controls hiding unmatched hints in rapid mode.
+# Valid values: true, false
+# Default: true
+hide-unmatched-rapid-hints = true
+
+
# Definitions of search engines which can be used via the address bar.
# The searchengine named `DEFAULT` is used when `general -> auto-search`
# is true and something else than a URL was entered to be opened. Other
-# search engines can be used via the bang-syntax, e.g. `:open
-# qutebrowser !google`. The string `{}` will be replaced by the search
-# term, use `{{` and `}}` for literal `{`/`}` signs.
+# search engines can be used by prepending the search engine name to the
+# search term, e.g. `:open google qutebrowser`. The string `{}` will be
+# replaced by the search term, use `{{` and `}}` for literal `{`/`}`
+# signs.
+[searchengines]
DEFAULT = ${duckduckgo}
-duckduckgo = https://duckduckgo.com/?q={}
+duckduckgo = https://duckduckgo.com/?t=chakra&q={}
ddg = ${duckduckgo}
google = https://encrypted.google.com/search?q={}
g = ${google}
wikipedia = http://en.wikipedia.org/w/index.php?title=Special:Search&search={}
wiki = ${wikipedia}
+pcl = http://docs.pointclouds.org/trunk/search.php?query={}
+std = http://en.cppreference.com/mwiki/index.php?title=Special%3ASearch&search={}
+cv = http://docs.opencv.org/3.1.0/index.html#gsc.tab=0&gsc.ref=more%3A3.1&gsc.q={}
+
-[aliases]
# Aliases for commands.
# By default, no aliases are defined. Example which adds a new command
# `:qtb` to open qutebrowsers website:
-# `qtb = open http://www.qutebrowser.org/`
+# `qtb = open https://www.qutebrowser.org/`
+[aliases]
+quit = close
+q = close
+exit = quit
+mpv = spawn --userscript ~/src/qutebrowser/misc/userscripts/view_in_mpv
+
-[colors]
# Colors used in the UI.
# A value can be in one of the following format:
# * `#RGB`/`#RRGGBB`/`#RRRGGGBBB`/`#RRRRGGGGBBBB`
-# * A SVG color name as specified in http://www.w3.org/TR/SVG/types.html#ColorKeywords[the W3C specification].
+# * An SVG color name as specified in http://www.w3.org/TR/SVG/types.html#ColorKeywords[the W3C specification].
# * transparent (no color)
# * `rgb(r, g, b)` / `rgba(r, g, b, a)` (values 0-255 or percentages)
# * `hsv(h, s, v)` / `hsva(h, s, v, a)` (values 0-255, hue 0-359)
-# * A gradient as explained in http://qt-project.org/doc/qt-4.8/stylesheet-reference.html#list-of-property-types[the Qt documentation] under ``Gradient''.
+# * A gradient as explained in http://doc.qt.io/qt-5/stylesheet-reference.html#list-of-property-types[the Qt documentation] under ``Gradient''.
+# A *.system value determines the color system to use for color
+# interpolation between similarly-named *.start and *.stop entries,
+# regardless of how they are defined in the options. Valid values are
+# 'rgb', 'hsv', and 'hsl'.
# The `hints.*` values are a special case as they're real CSS colors, not Qt-CSS colors. There, for a gradient, you need to use `-webkit-gradient`, see https://www.webkit.org/blog/175/introducing-css-gradients/[the WebKit documentation].
-#
-# completion.fg (qcolor):
+[colors]
+
+# completion.fg (QtColor):
# Text color of the completion widget.
# Default: white
-#
-# completion.bg (qss-color):
+completion.fg = white
+
+# completion.bg (QssColor):
# Background color of the completion widget.
# Default: #333333
-#
-# completion.item.bg (qss-color):
-# Background color of completion widget items.
-# Default: ${completion.bg}
-#
-# completion.category.fg (qcolor):
+completion.bg = #333333
+
+# completion.alternate-bg (QssColor):
+# Alternating background color of the completion widget.
+# Default: #444444
+completion.alternate-bg = #444444
+
+# completion.category.fg (QtColor):
# Foreground color of completion widget category headers.
# Default: white
-#
-# completion.category.bg (qss-color):
+completion.category.fg = white
+
+# completion.category.bg (QssColor):
# Background color of the completion widget category headers.
# Default: qlineargradient(x1:0, y1:0, x2:0, y2:1, stop:0 #888888,
# stop:1 #505050)
-#
-# completion.category.border.top (qss-color):
+completion.category.bg = qlineargradient(x1:0, y1:0, x2:0, y2:1, stop:0 #888888, stop:1 #505050)
+
+# completion.category.border.top (QssColor):
# Top border color of the completion widget category headers.
# Default: black
-#
-# completion.category.border.bottom (qss-color):
+completion.category.border.top = black
+
+# completion.category.border.bottom (QssColor):
# Bottom border color of the completion widget category headers.
# Default: ${completion.category.border.top}
-#
-# completion.item.selected.fg (qcolor):
+completion.category.border.bottom = ${completion.category.border.top}
+
+# completion.item.selected.fg (QtColor):
# Foreground color of the selected completion item.
# Default: black
-#
-# completion.item.selected.bg (qss-color):
+completion.item.selected.fg = black
+
+# completion.item.selected.bg (QssColor):
# Background color of the selected completion item.
# Default: #e8c000
-#
-# completion.item.selected.border.top (qss-color):
+completion.item.selected.bg = #e8c000
+
+# completion.item.selected.border.top (QssColor):
# Top border color of the completion widget category headers.
# Default: #bbbb00
-#
-# completion.item.selected.border.bottom (qss-color):
+completion.item.selected.border.top = #bbbb00
+
+# completion.item.selected.border.bottom (QssColor):
# Bottom border color of the selected completion item.
# Default: ${completion.item.selected.border.top}
-#
-# completion.match.fg (qss-color):
+completion.item.selected.border.bottom = ${completion.item.selected.border.top}
+
+# completion.match.fg (QssColor):
# Foreground color of the matched text in the completion.
# Default: #ff4444
-#
-# statusbar.bg (qss-color):
-# Foreground color of the statusbar.
-# Default: black
-#
-# statusbar.fg (qss-color):
+completion.match.fg = #ff4444
+
+# completion.scrollbar.fg (QssColor):
+# Color of the scrollbar handle in completion view.
+# Default: ${completion.fg}
+completion.scrollbar.fg = ${completion.fg}
+
+# completion.scrollbar.bg (QssColor):
+# Color of the scrollbar in completion view
+# Default: ${completion.bg}
+completion.scrollbar.bg = ${completion.bg}
+
+# statusbar.fg (QssColor):
# Foreground color of the statusbar.
# Default: white
-#
-# statusbar.bg.error (qss-color):
-# Background color of the statusbar if there was an error.
-# Default: red
-#
-# statusbar.bg.prompt (qss-color):
-# Background color of the statusbar if there is a prompt.
-# Default: darkblue
-#
-# statusbar.bg.insert (qss-color):
+statusbar.fg = white
+
+# statusbar.bg (QssColor):
+# Background color of the statusbar.
+# Default: black
+statusbar.bg = black
+
+# statusbar.fg.private (QssColor):
+# Foreground color of the statusbar in private browsing mode.
+# Default: ${statusbar.fg}
+statusbar.fg.private = ${statusbar.fg}
+
+# statusbar.bg.private (QssColor):
+# Background color of the statusbar in private browsing mode.
+# Default: #666666
+statusbar.bg.private = #666666
+
+# statusbar.fg.insert (QssColor):
+# Foreground color of the statusbar in insert mode.
+# Default: ${statusbar.fg}
+statusbar.fg.insert = ${statusbar.fg}
+
+# statusbar.bg.insert (QssColor):
# Background color of the statusbar in insert mode.
# Default: darkgreen
-#
-# statusbar.progress.bg (qss-color):
+statusbar.bg.insert = darkgreen
+
+# statusbar.fg.command (QssColor):
+# Foreground color of the statusbar in command mode.
+# Default: ${statusbar.fg}
+statusbar.fg.command = ${statusbar.fg}
+
+# statusbar.bg.command (QssColor):
+# Background color of the statusbar in command mode.
+# Default: ${statusbar.bg}
+statusbar.bg.command = ${statusbar.bg}
+
+# statusbar.fg.command.private (QssColor):
+# Foreground color of the statusbar in private browsing + command
+# mode.
+# Default: ${statusbar.fg.private}
+statusbar.fg.command.private = ${statusbar.fg.private}
+
+# statusbar.bg.command.private (QssColor):
+# Background color of the statusbar in private browsing + command
+# mode.
+# Default: ${statusbar.bg.private}
+statusbar.bg.command.private = ${statusbar.bg.private}
+
+# statusbar.fg.caret (QssColor):
+# Foreground color of the statusbar in caret mode.
+# Default: ${statusbar.fg}
+statusbar.fg.caret = ${statusbar.fg}
+
+# statusbar.bg.caret (QssColor):
+# Background color of the statusbar in caret mode.
+# Default: purple
+statusbar.bg.caret = purple
+
+# statusbar.fg.caret-selection (QssColor):
+# Foreground color of the statusbar in caret mode with a selection
+# Default: ${statusbar.fg}
+statusbar.fg.caret-selection = ${statusbar.fg}
+
+# statusbar.bg.caret-selection (QssColor):
+# Background color of the statusbar in caret mode with a selection
+# Default: #a12dff
+statusbar.bg.caret-selection = #a12dff
+
+# statusbar.progress.bg (QssColor):
# Background color of the progress bar.
# Default: white
-#
-# statusbar.url.fg (qss-color):
+statusbar.progress.bg = white
+
+# statusbar.url.fg (QssColor):
# Default foreground color of the URL in the statusbar.
# Default: ${statusbar.fg}
-#
-# statusbar.url.fg.success (qss-color):
-# Foreground color of the URL in the statusbar on successful load.
+statusbar.url.fg = ${statusbar.fg}
+
+# statusbar.url.fg.success (QssColor):
+# Foreground color of the URL in the statusbar on successful load
+# (http).
+# Default: white
+statusbar.url.fg.success = white
+
+# statusbar.url.fg.success.https (QssColor):
+# Foreground color of the URL in the statusbar on successful load
+# (https).
# Default: lime
-#
-# statusbar.url.fg.error (qss-color):
+statusbar.url.fg.success.https = lime
+
+# statusbar.url.fg.error (QssColor):
# Foreground color of the URL in the statusbar on error.
# Default: orange
-#
-# statusbar.url.fg.warn (qss-color):
+statusbar.url.fg.error = orange
+
+# statusbar.url.fg.warn (QssColor):
# Foreground color of the URL in the statusbar when there's a
# warning.
# Default: yellow
-#
-# statusbar.url.fg.hover (qss-color):
+statusbar.url.fg.warn = yellow
+
+# statusbar.url.fg.hover (QssColor):
# Foreground color of the URL in the statusbar for hovered links.
# Default: aqua
-#
-# tabs.fg.odd (qcolor):
+statusbar.url.fg.hover = aqua
+
+# tabs.fg.odd (QtColor):
# Foreground color of unselected odd tabs.
# Default: white
-#
-# tabs.fg.even (qcolor):
-# Foreground color of unselected even tabs.
-# Default: white
-#
-# tabs.fg.selected (qcolor):
-# Foreground color of selected tabs.
-# Default: white
-#
-# tabs.bg.odd (qcolor):
+tabs.fg.odd = white
+
+# tabs.bg.odd (QtColor):
# Background color of unselected odd tabs.
# Default: grey
-#
-# tabs.bg.even (qcolor):
+tabs.bg.odd = grey
+
+# tabs.fg.even (QtColor):
+# Foreground color of unselected even tabs.
+# Default: white
+tabs.fg.even = white
+
+# tabs.bg.even (QtColor):
# Background color of unselected even tabs.
# Default: darkgrey
-#
-# tabs.bg.selected (qcolor):
-# Background color of selected tabs.
+tabs.bg.even = darkgrey
+
+# tabs.fg.selected.odd (QtColor):
+# Foreground color of selected odd tabs.
+# Default: white
+tabs.fg.selected.odd = white
+
+# tabs.bg.selected.odd (QtColor):
+# Background color of selected odd tabs.
# Default: black
-#
-# tabs.bg.bar (qcolor):
-# Background color of the tabbar.
+tabs.bg.selected.odd = black
+
+# tabs.fg.selected.even (QtColor):
+# Foreground color of selected even tabs.
+# Default: ${tabs.fg.selected.odd}
+tabs.fg.selected.even = ${tabs.fg.selected.odd}
+
+# tabs.bg.selected.even (QtColor):
+# Background color of selected even tabs.
+# Default: ${tabs.bg.selected.odd}
+tabs.bg.selected.even = ${tabs.bg.selected.odd}
+
+# tabs.bg.bar (QtColor):
+# Background color of the tab bar.
# Default: #555555
-#
-# tabs.indicator.start (qcolor):
+tabs.bg.bar = #555555
+
+# tabs.indicator.start (QtColor):
# Color gradient start for the tab indicator.
# Default: #0000aa
-#
-# tabs.indicator.stop (qcolor):
+tabs.indicator.start = #0000aa
+
+# tabs.indicator.stop (QtColor):
# Color gradient end for the tab indicator.
# Default: #00aa00
-#
-# tabs.indicator.error (qcolor):
+tabs.indicator.stop = #00aa00
+
+# tabs.indicator.error (QtColor):
# Color for the tab indicator on errors..
# Default: #ff0000
-#
-# tabs.indicator.system:
+tabs.indicator.error = #ff0000
+
+# tabs.indicator.system (ColorSystem):
# Color gradient interpolation system for the tab indicator.
# rgb: Interpolate in the RGB color system.
# hsv: Interpolate in the HSV color system.
# hsl: Interpolate in the HSL color system.
+# none: Don't show a gradient.
# Default: rgb
-#
-# tabs.seperator (qss-color):
-# Color for the tab seperator.
-# Default: #555555
-#
-# hints.fg (css-color):
+tabs.indicator.system = rgb
+
+# hints.fg (QssColor):
# Font color for hints.
# Default: black
-#
-# hints.fg.match (css-color):
+hints.fg = black
+
+# hints.bg (QssColor):
+# Background color for hints. Note that you can use a `rgba(...)`
+# value for transparency.
+# Default: qlineargradient(x1:0, y1:0, x2:0, y2:1, stop:0 rgba(255,
+# 247, 133, 0.8), stop:1 rgba(255, 197, 66, 0.8))
+hints.bg = qlineargradient(x1:0, y1:0, x2:0, y2:1, stop:0 rgba(255, 247, 133, 0.8), stop:1 rgba(255, 197, 66, 0.8))
+
+# hints.fg.match (QssColor):
# Font color for the matched part of hints.
# Default: green
-#
-# hints.bg (css-color):
-# Background color for hints.
-# Default: -webkit-gradient(linear, left top, left bottom,
-# color-stop(0%,#FFF785), color-stop(100%,#FFC542))
-#
-# downloads.fg (qcolor):
-# Foreground color for downloads.
-# Default: #ffffff
-#
-# downloads.bg.bar (qss-color):
+hints.fg.match = green
+
+# downloads.bg.bar (QssColor):
# Background color for the download bar.
# Default: black
-#
-# downloads.bg.start (qcolor):
-# Color gradient start for downloads.
+downloads.bg.bar = black
+
+# downloads.fg.start (QtColor):
+# Color gradient start for download text.
+# Default: white
+downloads.fg.start = white
+
+# downloads.bg.start (QtColor):
+# Color gradient start for download backgrounds.
# Default: #0000aa
-#
-# downloads.bg.stop (qcolor):
-# Color gradient end for downloads.
+downloads.bg.start = #0000aa
+
+# downloads.fg.stop (QtColor):
+# Color gradient end for download text.
+# Default: ${downloads.fg.start}
+downloads.fg.stop = ${downloads.fg.start}
+
+# downloads.bg.stop (QtColor):
+# Color gradient stop for download backgrounds.
# Default: #00aa00
-#
-# downloads.bg.system:
-# Color gradient interpolation system for downloads.
+downloads.bg.stop = #00aa00
+
+# downloads.fg.system (ColorSystem):
+# Color gradient interpolation system for download text.
# rgb: Interpolate in the RGB color system.
# hsv: Interpolate in the HSV color system.
# hsl: Interpolate in the HSL color system.
+# none: Don't show a gradient.
# Default: rgb
-#
-# downloads.bg.error (qcolor):
+downloads.fg.system = rgb
+
+# downloads.bg.system (ColorSystem):
+# Color gradient interpolation system for download backgrounds.
+# rgb: Interpolate in the RGB color system.
+# hsv: Interpolate in the HSV color system.
+# hsl: Interpolate in the HSL color system.
+# none: Don't show a gradient.
+# Default: rgb
+downloads.bg.system = rgb
+
+# downloads.fg.error (QtColor):
+# Foreground color for downloads with errors.
+# Default: white
+downloads.fg.error = white
+
+# downloads.bg.error (QtColor):
# Background color for downloads with errors.
# Default: red
-completion.fg = white
-completion.bg = #333333
-completion.item.bg = ${completion.bg}
-completion.category.fg = white
-completion.category.bg = qlineargradient(x1:0, y1:0, x2:0, y2:1, stop:0 #888888, stop:1 #505050)
-completion.category.border.top = black
-completion.category.border.bottom = ${completion.category.border.top}
-completion.item.selected.fg = black
-completion.item.selected.bg = #e8c000
-completion.item.selected.border.top = #bbbb00
-completion.item.selected.border.bottom = ${completion.item.selected.border.top}
-completion.match.fg = #ff4444
-statusbar.bg = black
-statusbar.fg = white
-statusbar.bg.error = red
-statusbar.bg.prompt = darkblue
-statusbar.bg.insert = darkgreen
-statusbar.progress.bg = white
-statusbar.url.fg = ${statusbar.fg}
-statusbar.url.fg.success = lime
-statusbar.url.fg.error = orange
-statusbar.url.fg.warn = yellow
-statusbar.url.fg.hover = aqua
-tabs.fg.odd = white
-tabs.fg.even = white
-tabs.fg.selected = white
-tabs.bg.odd = grey
-tabs.bg.even = darkgrey
-tabs.bg.selected = black
-tabs.bg.bar = #555555
-tabs.indicator.start = #0000aa
-tabs.indicator.stop = #00aa00
-tabs.indicator.error = #ff0000
-tabs.indicator.system = rgb
-tabs.seperator = #555555
-hints.fg = black
-hints.fg.match = green
-hints.bg = -webkit-gradient(linear, left top, left bottom, color-stop(0%,#FFF785), color-stop(100%,#FFC542))
-downloads.fg = #ffffff
-downloads.bg.bar = black
-downloads.bg.start = #0000aa
-downloads.bg.stop = #00aa00
-downloads.bg.system = rgb
downloads.bg.error = red
-[fonts]
+# webpage.bg (QtColor):
+# Background color for webpages if unset (or empty to use the
+# theme's color)
+# Default: white
+webpage.bg = white
+
+# keyhint.fg (QssColor):
+# Text color for the keyhint widget.
+# Default: #FFFFFF
+keyhint.fg = #FFFFFF
+
+# keyhint.fg.suffix (CssColor):
+# Highlight color for keys to complete the current keychain
+# Default: #FFFF00
+keyhint.fg.suffix = #FFFF00
+
+# keyhint.bg (QssColor):
+# Background color of the keyhint widget.
+# Default: rgba(0, 0, 0, 80%)
+keyhint.bg = rgba(0, 0, 0, 80%)
+
+# messages.fg.error (QssColor):
+# Foreground color of an error message.
+# Default: white
+messages.fg.error = ${statusbar.fg}
+
+# messages.bg.error (QssColor):
+# Background color of an error message.
+# Default: red
+messages.bg.error = red
+
+# messages.border.error (QssColor):
+# Border color of an error message.
+# Default: #bb0000
+messages.border.error = #bb0000
+
+# messages.fg.warning (QssColor):
+# Foreground color a warning message.
+# Default: white
+messages.fg.warning = ${statusbar.fg}
+
+# messages.bg.warning (QssColor):
+# Background color of a warning message.
+# Default: darkorange
+messages.bg.warning = darkorange
+
+# messages.border.warning (QssColor):
+# Border color of an error message.
+# Default: #d47300
+messages.border.warning = #d47300
+
+# messages.fg.info (QssColor):
+# Foreground color an info message.
+# Default: white
+messages.fg.info = white
+
+# messages.bg.info (QssColor):
+# Background color of an info message.
+# Default: black
+messages.bg.info = black
+
+# messages.border.info (QssColor):
+# Border color of an info message.
+# Default: #333333
+messages.border.info = #333333
+
+# prompts.fg (QssColor):
+# Foreground color for prompts.
+# Default: white
+prompts.fg = ${statusbar.fg}
+
+# prompts.bg (QssColor):
+# Background color for prompts.
+# Default: darkblue
+prompts.bg = #333333
+
+# prompts.selected.bg (QssColor):
+# Background color for the selected item in filename prompts.
+# Default: #308cc6
+prompts.selected.bg = #308cc6
+
+
# Fonts used for the UI, with optional style/weight/size.
# * Style: `normal`/`italic`/`oblique`
# * Weight: `normal`, `bold`, `100`..`900`
# * Size: _number_ `px`/`pt`
-#
-# _monospace (font):
+[fonts]
+
+# _monospace (Font):
# Default monospace fonts.
-# Default: Terminus, Monospace, "DejaVu Sans Mono", Monaco,
-# "Bitstream Vera Sans Mono", "Andale Mono", "Liberation Mono",
-# "Courier New", Courier, monospace, Fixed, Consolas, Terminal
-#
-# completion (font):
+# Default: xos4 Terminus, Terminus, Monospace, "DejaVu Sans Mono",
+# Monaco, "Bitstream Vera Sans Mono", "Andale Mono", "Courier New",
+# Courier, "Liberation Mono", monospace, Fixed, Consolas, Terminal
+_monospace = Hack, Terminus, Monospace, "DejaVu Sans Mono", Monaco, "Bitstream Vera Sans Mono", "Andale Mono", "Liberation Mono", "Courier New", Courier, monospace, Fixed, Consolas, Terminal
+
+# completion (Font):
# Font used in the completion widget.
# Default: 8pt ${_monospace}
-#
-# tabbar (font):
-# Font used in the tabbar.
+completion = 8pt ${_monospace}
+
+# completion.category (Font):
+# Font used in the completion categories.
+# Default: bold ${completion}
+completion.category = bold ${completion}
+
+# tabbar (QtFont):
+# Font used in the tab bar.
# Default: 8pt ${_monospace}
-#
-# statusbar (font):
+tabbar = 8pt ${_monospace}
+
+# statusbar (Font):
# Font used in the statusbar.
# Default: 8pt ${_monospace}
-#
-# downloads (font):
+statusbar = 8pt ${_monospace}
+
+# downloads (Font):
# Font used for the downloadbar.
# Default: 8pt ${_monospace}
-#
-# hints (font):
+downloads = 8pt ${_monospace}
+
+# hints (Font):
# Font used for the hints.
-# Default: bold 12px Monospace
-#
-# debug-console (font):
+# Default: bold 13px ${_monospace}
+hints = bold 12px ${_monospace}
+
+# debug-console (QtFont):
# Font used for the debugging console.
# Default: 8pt ${_monospace}
-#
-# web-family-standard (string):
+debug-console = 8pt ${_monospace}
+
+# web-family-standard (FontFamily):
# Font family for standard fonts.
# Default:
-#
-# web-family-fixed (string):
+web-family-standard =
+
+# web-family-fixed (FontFamily):
# Font family for fixed fonts.
# Default:
-#
-# web-family-serif (string):
+web-family-fixed =
+
+# web-family-serif (FontFamily):
# Font family for serif fonts.
# Default:
-#
-# web-family-sans-serif (string):
+web-family-serif =
+
+# web-family-sans-serif (FontFamily):
# Font family for sans-serif fonts.
# Default:
-#
-# web-family-cursive (string):
+web-family-sans-serif =
+
+# web-family-cursive (FontFamily):
# Font family for cursive fonts.
# Default:
-#
-# web-family-fantasy (string):
+web-family-cursive =
+
+# web-family-fantasy (FontFamily):
# Font family for fantasy fonts.
# Default:
-#
-# web-size-minimum (int):
+web-family-fantasy =
+
+# web-size-minimum (Int):
# The hard minimum font size.
-# Default:
-#
-# web-size-minimum-logical (int):
+# Default: 0
+web-size-minimum = 0
+
+# web-size-minimum-logical (Int):
# The minimum logical font size that is applied when zooming out.
-# Default:
-#
-# web-size-default (int):
+# Default: 6
+web-size-minimum-logical = 6
+
+# web-size-default (Int):
# The default font size for regular text.
-# Default:
-#
-# web-size-default-fixed (int):
+# Default: 16
+web-size-default = 16
+
+# web-size-default-fixed (Int):
# The default font size for fixed-pitch text.
-# Default:
-_monospace = Terminus, Monospace, "DejaVu Sans Mono", Monaco, "Bitstream Vera Sans Mono", "Andale Mono", "Liberation Mono", "Courier New", Courier, monospace, Fixed, Consolas, Terminal
-completion = 8pt ${_monospace}
-tabbar = 8pt ${_monospace}
-statusbar = 8pt ${_monospace}
-downloads = 8pt ${_monospace}
-hints = bold 12px Monospace
-debug-console = 8pt ${_monospace}
-web-family-standard =
-web-family-fixed =
-web-family-serif =
-web-family-sans-serif =
-web-family-cursive =
-web-family-fantasy =
-web-size-minimum =
-web-size-minimum-logical =
-web-size-default =
-web-size-default-fixed =
+# Default: 13
+web-size-default-fixed = 13
+
+# keyhint (Font):
+# Font used in the keyhint widget.
+# Default: 8pt ${_monospace}
+keyhint = 8pt ${_monospace}
+
+# messages.error (Font):
+# Font used for error messages.
+# Default: 8pt ${_monospace}
+messages.error = 8pt ${_monospace}
+
+# messages.warning (Font):
+# Font used for warning messages.
+# Default: 8pt ${_monospace}
+messages.warning = 8pt ${_monospace}
+
+# messages.info (Font):
+# Font used for info messages.
+# Default: 8pt ${_monospace}
+messages.info = 8pt ${_monospace}
+
+# prompts (Font):
+# Font used for prompts.
+# Default: 8pt sans-serif
+prompts = 8pt sans-serif
repos / dotfiles.git / blobdiff