+++ /dev/null
-# vim: ft=dosini
-
-# Configfile for qutebrowser.
-#
-# This configfile is parsed by python's configparser in extended
-# interpolation mode. The format is very INI-like, so there are
-# categories like [general] with "key = value"-pairs.
-#
-# Note that you shouldn't add your own comments, as this file is
-# regenerated every time the config is saved.
-#
-# Interpolation looks like ${value} or ${section:value} and will be
-# replaced by the respective value.
-#
-# Some settings will expand environment variables. Note that, since
-# interpolation is run first, you will need to escape the $ char as
-# described below.
-#
-# This is the default config, so if you want to remove anything from
-# here (as opposed to change/add), for example a key binding, set it to
-# an empty value.
-#
-# You will need to escape the following values:
-# - # at the start of the line (at the first position of the key) (\#)
-# - $ in a value ($$)
-
-
-# General/miscellaneous options.
-[general]
-
-# ignore-case (IgnoreCase):
-# Whether to find text on a page case-insensitively.
-# true: Search case-insensitively
-# false: Search case-sensitively
-# smart: Search case-sensitively if there are capital chars
-# Default: smart
-ignore-case = smart
-
-# startpage (List of String):
-# The default page(s) to open at the start, separated by commas.
-# Default: https://start.duckduckgo.com
-startpage = https://duckduckgo.com/?t=chakra
-
-# yank-ignored-url-parameters (List of String):
-# The URL parameters to strip with :yank url, separated by commas.
-# Default:
-# ref,utm_source,utm_medium,utm_campaign,utm_term,utm_content
-yank-ignored-url-parameters = ref,utm_source,utm_medium,utm_campaign,utm_term,utm_content
-
-# default-open-dispatcher (String):
-# The default program used to open downloads. Set to an empty string
-# to use the default internal handler.
-# Any {} in the string will be expanded to the filename, else the
-# filename will be appended.
-# Default:
-default-open-dispatcher = rifle
-
-# default-page (FuzzyUrl):
-# The page to open if :open -t/-b/-w is used without URL. Use
-# `about:blank` for a blank page.
-# Default: ${startpage}
-default-page = ${startpage}
-
-# auto-search (AutoSearch):
-# Whether to start a search when something else than a URL is
-# entered.
-# naive: Use simple/naive check.
-# dns: Use DNS requests (might be slow!).
-# false: Never search automatically.
-# Default: naive
-auto-search = naive
-
-# auto-save-config (Bool):
-# Whether to save the config automatically on quit.
-# Valid values: true, false
-# Default: true
-auto-save-config = true
-
-# auto-save-interval (Int):
-# How often (in milliseconds) to auto-save config/cookies/etc.
-# Default: 15000
-auto-save-interval = 15000
-
-# editor (ShellCommand):
-# The editor (and arguments) to use for the `open-editor` command.
-# The arguments get split like in a shell, so you can use `"` or `'`
-# to quote them.
-# `{}` gets replaced by the filename of the file to be edited.
-# Default: gvim -f "{}"
-editor = urxvt -e vim "{}"
-
-# editor-encoding (Encoding):
-# Encoding to use for editor.
-# Default: utf-8
-editor-encoding = utf-8
-
-# private-browsing (Bool):
-# Open new windows in private browsing mode which does not record
-# visited pages.
-# Valid values: true, false
-# Default: false
-private-browsing = false
-
-# developer-extras (Bool):
-# Enable extra tools for Web developers.
-# This needs to be enabled for `:inspector` to work and also adds an
-# _Inspect_ entry to the context menu. For QtWebEngine, see
-# 'qutebrowser --help' instead.
-# Valid values: true, false
-# Default: false
-developer-extras = true
-
-# print-element-backgrounds (Bool):
-# Whether the background color and images are also drawn when the
-# page is printed.
-# This setting only works with Qt 5.8 or newer when using the
-# QtWebEngine backend.
-# Valid values: true, false
-# Default: true
-print-element-backgrounds = true
-
-# xss-auditing (Bool):
-# Whether load requests should be monitored for cross-site scripting
-# attempts.
-# Suspicious scripts will be blocked and reported in the inspector's
-# JavaScript console. Enabling this feature might have an impact on
-# performance.
-# Valid values: true, false
-# Default: false
-xss-auditing = false
-
-# default-encoding (String):
-# Default encoding to use for websites.
-# The encoding must be a string describing an encoding such as
-# _utf-8_, _iso-8859-1_, etc.
-# Default: iso-8859-1
-default-encoding = iso-8859-1
-
-# new-instance-open-target (String):
-# How to open links in an existing instance if a new one is
-# launched.
-# tab: Open a new tab in the existing window and activate the
-# window.
-# tab-bg: Open a new background tab in the existing window and
-# activate the window.
-# tab-silent: Open a new tab in the existing window without
-# activating the window.
-# tab-bg-silent: Open a new background tab in the existing
-# window without activating the window.
-# window: Open in a new window.
-# Default: tab
-new-instance-open-target = tab
-
-# new-instance-open-target.window (String):
-# Which window to choose when opening links as new tabs.
-# first-opened: Open new tabs in the first (oldest) opened
-# window.
-# last-opened: Open new tabs in the last (newest) opened window.
-# last-focused: Open new tabs in the most recently focused
-# window.
-# last-visible: Open new tabs in the most recently visible
-# window.
-# Default: last-focused
-new-instance-open-target.window = last-focused
-
-# log-javascript-console (String):
-# How to log javascript console messages.
-# none: Don't log messages.
-# debug: Log messages with debug level.
-# info: Log messages with info level.
-# Default: debug
-log-javascript-console = none
-
-# save-session (Bool):
-# Whether to always save the open pages.
-# Valid values: true, false
-# Default: false
-save-session = true
-
-# session-default-name (SessionName):
-# The name of the session to save by default, or empty for the last
-# loaded session.
-# Default:
-session-default-name =
-
-# url-incdec-segments (FlagList):
-# The URL segments where `:navigate increment/decrement` will search
-# for a number.
-# Valid values: host, path, query, anchor
-# Default: path,query
-url-incdec-segments = path,query
-
-
-# General options related to the user interface.
-[ui]
-
-# history-session-interval (Int):
-# The maximum time in minutes between two history items for them to
-# be considered being from the same session. Use -1 to disable
-# separation.
-# Default: 30
-history-session-interval = 30
-
-# zoom-levels (List of Perc):
-# The available zoom levels, separated by commas.
-# Default:
-# 25%,33%,50%,67%,75%,90%,100%,110%,125%,150%,175%,200%,250%,300%,400%,500%
-zoom-levels = 25%,33%,50%,67%,75%,90%,100%,110%,125%,150%,175%,200%,250%,300%,400%,500%
-
-# default-zoom (Perc):
-# The default zoom level.
-# Default: 100%
-default-zoom = 100%
-
-# downloads-position (VerticalPosition):
-# Where to show the downloaded files.
-# Valid values: top, bottom
-# Default: top
-downloads-position = top
-
-# status-position (VerticalPosition):
-# The position of the status bar.
-# Valid values: top, bottom
-# Default: bottom
-status-position = bottom
-
-# message-timeout (Int):
-# Time (in ms) to show messages in the statusbar for.
-# Set to 0 to never clear messages.
-# Default: 2000
-message-timeout = 2000
-
-# message-unfocused (Bool):
-# Whether to show messages in unfocused windows.
-# Valid values: true, false
-# Default: false
-message-unfocused = false
-
-# confirm-quit (ConfirmQuit):
-# Whether to confirm quitting the application.
-# always: Always show a confirmation.
-# multiple-tabs: Show a confirmation if multiple tabs are
-# opened.
-# downloads: Show a confirmation if downloads are running
-# never: Never show a confirmation.
-# Default: never
-confirm-quit = downloads
-
-# zoom-text-only (Bool):
-# Whether the zoom factor on a frame applies only to the text or to
-# all content.
-# Valid values: true, false
-# Default: false
-zoom-text-only = false
-
-# frame-flattening (Bool):
-# Whether to expand each subframe to its contents.
-# This will flatten all the frames to become one scrollable page.
-# Valid values: true, false
-# Default: false
-frame-flattening = false
-
-# user-stylesheet (File):
-# User stylesheet to use (absolute filename or filename relative to
-# the config directory). Will expand environment variables.
-# Default:
-user-stylesheet =
-
-# hide-scrollbar (Bool):
-# Hide the main scrollbar.
-# Valid values: true, false
-# Default: true
-hide-scrollbar = true
-
-# smooth-scrolling (Bool):
-# Whether to enable smooth scrolling for web pages. Note smooth
-# scrolling does not work with the :scroll-px command.
-# Valid values: true, false
-# Default: false
-smooth-scrolling = false
-
-# remove-finished-downloads (Int):
-# Number of milliseconds to wait before removing finished downloads.
-# Will not be removed if value is -1.
-# Default: -1
-remove-finished-downloads = -1
-
-# hide-statusbar (Bool):
-# Whether to hide the statusbar unless a message is shown.
-# Valid values: true, false
-# Default: false
-hide-statusbar = false
-
-# statusbar-padding (Padding):
-# Padding for statusbar (top, bottom, left, right).
-# Default: 1,1,0,0
-statusbar-padding = 1,1,0,0
-
-# window-title-format (FormatString):
-# The format to use for the window title. The following placeholders
-# are defined:
-# * `{perc}`: The percentage as a string like `[10%]`.
-# * `{perc_raw}`: The raw percentage, e.g. `10`
-# * `{title}`: The title of the current web page
-# * `{title_sep}`: The string ` - ` if a title is set, empty
-# otherwise.
-# * `{id}`: The internal window ID of this window.
-# * `{scroll_pos}`: The page scroll position.
-# * `{host}`: The host of the current web page.
-# * `{backend}`: Either 'webkit' or 'webengine'
-# * `{private}` : Indicates when private mode is enabled.
-# Default: {perc}{title}{title_sep}qutebrowser
-window-title-format = {perc}{title}{title_sep}qutebrowser
-
-# modal-js-dialog (Bool):
-# Use standard JavaScript modal dialog for alert() and confirm()
-# Valid values: true, false
-# Default: false
-modal-js-dialog = false
-
-# hide-wayland-decoration (Bool):
-# Hide the window decoration when using wayland (requires restart)
-# Valid values: true, false
-# Default: false
-hide-wayland-decoration = false
-
-# keyhint-blacklist (List of String):
-# Keychains that shouldn't be shown in the keyhint dialog
-# Globs are supported, so ';*' will blacklist all keychainsstarting
-# with ';'. Use '*' to disable keyhints
-# Default:
-keyhint-blacklist =
-
-# keyhint-delay (Int):
-# Time from pressing a key to seeing the keyhint dialog (ms)
-# Default: 500
-keyhint-delay = 500
-
-# prompt-radius (Int):
-# The rounding radius for the edges of prompts.
-# Default: 8
-prompt-radius = 8
-
-# prompt-filebrowser (Bool):
-# Show a filebrowser in upload/download prompts.
-# Valid values: true, false
-# Default: true
-prompt-filebrowser = true
-
-
-# Settings related to the network.
-[network]
-
-# do-not-track (Bool):
-# Value to send in the `DNT` header.
-# Valid values: true, false
-# Default: true
-do-not-track = true
-
-# accept-language (String):
-# Value to send in the `accept-language` header.
-# Default: en-US,en
-accept-language = en-US,en,de,fr
-
-# referer-header (String):
-# Send the Referer header
-# always: Always send.
-# never: Never send; this is not recommended, as some sites may
-# break.
-# same-domain: Only send for the same domain. This will still
-# protect your privacy, but shouldn't break any sites.
-# Default: same-domain
-referer-header = same-domain
-
-# user-agent (UserAgent):
-# User agent to send. Empty to send the default.
-# Default:
-user-agent =
-
-# proxy (Proxy):
-# The proxy to use.
-# In addition to the listed values, you can use a `socks://...` or
-# `http://...` URL.
-# system: Use the system wide proxy.
-# none: Don't use any proxy
-# Default: system
-proxy = system
-
-# proxy-dns-requests (Bool):
-# Whether to send DNS requests over the configured proxy.
-# Valid values: true, false
-# Default: true
-proxy-dns-requests = true
-
-# ssl-strict (BoolAsk):
-# Whether to validate SSL handshakes.
-# Valid values: true, false, ask
-# Default: ask
-ssl-strict = ask
-
-# dns-prefetch (Bool):
-# Whether to try to pre-fetch DNS entries to speed up browsing.
-# Valid values: true, false
-# Default: true
-dns-prefetch = true
-
-# custom-headers (HeaderDict):
-# Set custom headers for qutebrowser HTTP requests.
-# Default:
-custom-headers =
-
-# netrc-file (File):
-# Set location of a netrc-file for HTTP authentication. If empty,
-# ~/.netrc is used.
-# Default:
-netrc-file =
-
-
-# Options related to completion and command history.
-[completion]
-
-# show (String):
-# When to show the autocompletion window.
-# always: Whenever a completion is available.
-# auto: Whenever a completion is requested.
-# never: Never.
-# Default: always
-show = always
-
-# download-path-suggestion (String):
-# What to display in the download filename input.
-# path: Show only the download path.
-# filename: Show only download filename.
-# both: Show download path and filename.
-# Default: path
-download-path-suggestion = path
-
-# timestamp-format (TimestampTemplate):
-# How to format timestamps (e.g. for history)
-# Default: %Y-%m-%d
-timestamp-format = %Y-%m-%d
-
-# height (PercOrInt):
-# The height of the completion, in px or as percentage of the
-# window.
-# Default: 50%
-height = 150
-
-# cmd-history-max-items (Int):
-# How many commands to save in the command history.
-# 0: no history / -1: unlimited
-# Default: 100
-cmd-history-max-items = 100
-
-# web-history-max-items (Int):
-# How many URLs to show in the web history.
-# 0: no history / -1: unlimited
-# Default: 1000
-web-history-max-items = 1000
-
-# quick-complete (Bool):
-# Whether to move on to the next part when there's only one possible
-# completion left.
-# Valid values: true, false
-# Default: true
-quick-complete = false
-
-# shrink (Bool):
-# Whether to shrink the completion to be smaller than the configured
-# size if there are no scrollbars.
-# Valid values: true, false
-# Default: false
-shrink = true
-
-# scrollbar-width (Int):
-# Width of the scrollbar in the completion window (in px).
-# Default: 12
-scrollbar-width = 12
-
-# scrollbar-padding (Int):
-# Padding of scrollbar handle in completion window (in px).
-# Default: 2
-scrollbar-padding = 2
-
-
-# Options related to input modes.
-[input]
-
-# timeout (Int):
-# Timeout (in milliseconds) for ambiguous key bindings.
-# If the current input forms both a complete match and a partial
-# match, the complete match will be executed after this time.
-# Default: 500
-timeout = 500
-
-# partial-timeout (Int):
-# Timeout (in milliseconds) for partially typed key bindings.
-# If the current input forms only partial matches, the keystring
-# will be cleared after this time.
-# Default: 5000
-partial-timeout = 5000
-
-# insert-mode-on-plugins (Bool):
-# Whether to switch to insert mode when clicking flash and other
-# plugins.
-# Valid values: true, false
-# Default: false
-insert-mode-on-plugins = false
-
-# auto-leave-insert-mode (Bool):
-# Whether to leave insert mode if a non-editable element is clicked.
-# Valid values: true, false
-# Default: true
-auto-leave-insert-mode = true
-
-# auto-insert-mode (Bool):
-# Whether to automatically enter insert mode if an editable element
-# is focused after page load.
-# Valid values: true, false
-# Default: false
-auto-insert-mode = false
-
-# forward-unbound-keys (String):
-# Whether to forward unbound keys to the webview in normal mode.
-# all: Forward all unbound keys.
-# auto: Forward unbound non-alphanumeric keys.
-# none: Don't forward any keys.
-# Default: auto
-forward-unbound-keys = auto
-
-# spatial-navigation (Bool):
-# Enables or disables the Spatial Navigation feature.
-# Spatial navigation consists in the ability to navigate between
-# focusable elements in a Web page, such as hyperlinks and form
-# controls, by using Left, Right, Up and Down arrow keys. For
-# example, if a user presses the Right key, heuristics determine
-# whether there is an element he might be trying to reach towards
-# the right and which element he probably wants.
-# Valid values: true, false
-# Default: false
-spatial-navigation = false
-
-# links-included-in-focus-chain (Bool):
-# Whether hyperlinks should be included in the keyboard focus chain.
-# Valid values: true, false
-# Default: true
-links-included-in-focus-chain = true
-
-# rocker-gestures (Bool):
-# Whether to enable Opera-like mouse rocker gestures. This disables
-# the context menu.
-# Valid values: true, false
-# Default: false
-rocker-gestures = false
-
-# mouse-zoom-divider (Int):
-# How much to divide the mouse wheel movements to translate them
-# into zoom increments.
-# Default: 512
-mouse-zoom-divider = 512
-
-
-# Configuration of the tab bar.
-[tabs]
-
-# background-tabs (Bool):
-# Whether to open new tabs (middleclick/ctrl+click) in background.
-# Valid values: true, false
-# Default: false
-background-tabs = false
-
-# select-on-remove (SelectOnRemove):
-# Which tab to select when the focused tab is removed.
-# prev: Select the tab which came before the closed one (left in
-# horizontal, above in vertical).
-# next: Select the tab which came after the closed one (right in
-# horizontal, below in vertical).
-# last-used: Select the previously selected tab.
-# Default: next
-select-on-remove = prev
-
-# new-tab-position (NewTabPosition):
-# How new tabs are positioned.
-# prev: Before the current tab.
-# next: After the current tab.
-# first: At the beginning.
-# last: At the end.
-# Default: next
-new-tab-position = next
-
-# new-tab-position-explicit (NewTabPosition):
-# How new tabs opened explicitly are positioned.
-# prev: Before the current tab.
-# next: After the current tab.
-# first: At the beginning.
-# last: At the end.
-# Default: last
-new-tab-position-explicit = next
-
-# last-close (String):
-# Behavior when the last tab is closed.
-# ignore: Don't do anything.
-# blank: Load a blank page.
-# startpage: Load the start page.
-# default-page: Load the default page.
-# close: Close the window.
-# Default: ignore
-last-close = ignore
-
-# show (String):
-# When to show the tab bar
-# always: Always show the tab bar.
-# never: Always hide the tab bar.
-# multiple: Hide the tab bar if only one tab is open.
-# switching: Show the tab bar when switching tabs.
-# Default: always
-show = always
-
-# show-switching-delay (Int):
-# Time to show the tab bar before hiding it when tabs->show is set
-# to 'switching'.
-# Default: 800
-show-switching-delay = 800
-
-# wrap (Bool):
-# Whether to wrap when changing tabs.
-# Valid values: true, false
-# Default: true
-wrap = true
-
-# movable (Bool):
-# Whether tabs should be movable.
-# Valid values: true, false
-# Default: true
-movable = true
-
-# close-mouse-button (String):
-# On which mouse button to close tabs.
-# right: Close tabs on right-click.
-# middle: Close tabs on middle-click.
-# none: Don't close tabs using the mouse.
-# Default: middle
-close-mouse-button = middle
-
-# position (Position):
-# The position of the tab bar.
-# Valid values: top, bottom, left, right
-# Default: top
-position = top
-
-# show-favicons (Bool):
-# Whether to show favicons in the tab bar.
-# Valid values: true, false
-# Default: true
-show-favicons = true
-
-# favicon-scale (Float):
-# Scale for favicons in the tab bar. The tab size is unchanged, so
-# big favicons also require extra `tabs->padding`.
-# Default: 1.0
-favicon-scale = 1.0
-
-# width (PercOrInt):
-# The width of the tab bar if it's vertical, in px or as percentage
-# of the window.
-# Default: 20%
-width = 20%
-
-# pinned-width (Int):
-# The width for pinned tabs with a horizontal tabbar, in px.
-# Default: 43
-pinned-width = 43
-
-# indicator-width (Int):
-# Width of the progress indicator (0 to disable).
-# Default: 3
-indicator-width = 3
-
-# tabs-are-windows (Bool):
-# Whether to open windows instead of tabs.
-# Valid values: true, false
-# Default: false
-tabs-are-windows = false
-
-# title-format (FormatString):
-# The format to use for the tab title. The following placeholders
-# are defined:
-# * `{perc}`: The percentage as a string like `[10%]`.
-# * `{perc_raw}`: The raw percentage, e.g. `10`
-# * `{title}`: The title of the current web page
-# * `{title_sep}`: The string ` - ` if a title is set, empty
-# otherwise.
-# * `{index}`: The index of this tab.
-# * `{id}`: The internal tab ID of this tab.
-# * `{scroll_pos}`: The page scroll position.
-# * `{host}`: The host of the current web page.
-# * `{backend}`: Either 'webkit' or 'webengine'
-# * `{private}` : Indicates when private mode is enabled.
-# Default: {index}: {title}
-title-format = {index}: {title}
-
-# title-format-pinned (FormatString):
-# The format to use for the tab title for pinned tabs. The same
-# placeholders like for title-format are defined.
-# Default: {index}
-title-format-pinned = {index}
-
-# title-alignment (TextAlignment):
-# Alignment of the text inside of tabs
-# Valid values: left, right, center
-# Default: left
-title-alignment = left
-
-# mousewheel-tab-switching (Bool):
-# Switch between tabs using the mouse wheel.
-# Valid values: true, false
-# Default: true
-mousewheel-tab-switching = true
-
-# padding (Padding):
-# Padding for tabs (top, bottom, left, right).
-# Default: 0,0,5,5
-padding = 0,0,5,5
-
-# indicator-padding (Padding):
-# Padding for indicators (top, bottom, left, right).
-# Default: 2,2,0,4
-indicator-padding = 2,2,0,4
-
-
-# Settings related to cache and storage.
-[storage]
-
-# download-directory (Directory):
-# The directory to save downloads to. An empty value selects a
-# sensible os-specific default. Will expand environment variables.
-# Default:
-download-directory = ~/downloads
-
-# prompt-download-directory (Bool):
-# Whether to prompt the user for the download location.
-# If set to false, 'download-directory' will be used.
-# Valid values: true, false
-# Default: true
-prompt-download-directory = true
-
-# remember-download-directory (Bool):
-# Whether to remember the last used download directory.
-# Valid values: true, false
-# Default: true
-remember-download-directory = true
-
-# maximum-pages-in-cache (Int):
-# The maximum number of pages to hold in the global memory page
-# cache.
-# The Page Cache allows for a nicer user experience when navigating
-# forth or back to pages in the forward/back history, by pausing and
-# resuming up to _n_ pages.
-# For more information about the feature, please refer to:
-# http://webkit.org/blog/427/webkit-page-cache-i-the-basics/
-# Default: 0
-maximum-pages-in-cache = 0
-
-# offline-web-application-cache (Bool):
-# Whether support for the HTML 5 web application cache feature is
-# enabled.
-# An application cache acts like an HTTP cache in some sense. For
-# documents that use the application cache via JavaScript, the
-# loader engine will first ask the application cache for the
-# contents, before hitting the network.
-# The feature is described in details at:
-# http://dev.w3.org/html5/spec/Overview.html#appcache
-# Valid values: true, false
-# Default: true
-offline-web-application-cache = true
-
-# local-storage (Bool):
-# Whether support for HTML 5 local storage and Web SQL is enabled.
-# Valid values: true, false
-# Default: true
-local-storage = true
-
-# cache-size (Int):
-# Size of the HTTP network cache. Empty to use the default value.
-# Default:
-cache-size = 52428800
-
-
-# Loaded plugins/scripts and allowed actions.
-[content]
-
-# allow-images (Bool):
-# Whether images are automatically loaded in web pages.
-# Valid values: true, false
-# Default: true
-allow-images = true
-
-# allow-javascript (Bool):
-# Enables or disables the running of JavaScript programs.
-# Valid values: true, false
-# Default: true
-allow-javascript = true
-
-# allow-plugins (Bool):
-# Enables or disables plugins in Web pages.
-# Qt plugins with a mimetype such as "application/x-qt-plugin" are
-# not affected by this setting.
-# Valid values: true, false
-# Default: false
-allow-plugins = false
-
-# webgl (Bool):
-# Enables or disables WebGL.
-# Valid values: true, false
-# Default: true
-webgl = true
-
-# hyperlink-auditing (Bool):
-# Enable or disable hyperlink auditing (<a ping>).
-# Valid values: true, false
-# Default: false
-hyperlink-auditing = false
-
-# geolocation (BoolAsk):
-# Allow websites to request geolocations.
-# Valid values: true, false, ask
-# Default: ask
-geolocation = ask
-
-# notifications (BoolAsk):
-# Allow websites to show notifications.
-# Valid values: true, false, ask
-# Default: ask
-notifications = false
-
-# media-capture (BoolAsk):
-# Allow websites to record audio/video.
-# Valid values: true, false, ask
-# Default: ask
-media-capture = ask
-
-# javascript-can-open-windows-automatically (Bool):
-# Whether JavaScript programs can open new windows without user
-# interaction.
-# Valid values: true, false
-# Default: false
-javascript-can-open-windows-automatically = false
-
-# javascript-can-close-windows (Bool):
-# Whether JavaScript programs can close windows.
-# Valid values: true, false
-# Default: false
-javascript-can-close-windows = false
-
-# javascript-can-access-clipboard (Bool):
-# Whether JavaScript programs can read or write to the clipboard.
-# With QtWebEngine, writing the clipboard as response to a user
-# interaction is always allowed.
-# Valid values: true, false
-# Default: false
-javascript-can-access-clipboard = false
-
-# ignore-javascript-prompt (Bool):
-# Whether all javascript prompts should be ignored.
-# Valid values: true, false
-# Default: false
-ignore-javascript-prompt = false
-
-# ignore-javascript-alert (Bool):
-# Whether all javascript alerts should be ignored.
-# Valid values: true, false
-# Default: false
-ignore-javascript-alert = false
-
-# local-content-can-access-remote-urls (Bool):
-# Whether locally loaded documents are allowed to access remote
-# urls.
-# Valid values: true, false
-# Default: false
-local-content-can-access-remote-urls = false
-
-# local-content-can-access-file-urls (Bool):
-# Whether locally loaded documents are allowed to access other local
-# urls.
-# Valid values: true, false
-# Default: true
-local-content-can-access-file-urls = true
-
-# cookies-accept (String):
-# Control which cookies to accept.
-# all: Accept all cookies.
-# no-3rdparty: Accept cookies from the same origin only.
-# no-unknown-3rdparty: Accept cookies from the same origin only,
-# unless a cookie is already set for the domain.
-# never: Don't accept cookies at all.
-# Default: no-3rdparty
-cookies-accept = no-3rdparty
-
-# cookies-store (Bool):
-# Whether to store cookies. Note this option needs a restart with
-# QtWebEngine on Qt < 5.9.
-# Valid values: true, false
-# Default: true
-cookies-store = true
-
-# host-block-lists (List of Url):
-# List of URLs of lists which contain hosts to block.
-# The file can be in one of the following formats:
-# - An '/etc/hosts'-like file
-# - One host per line
-# - A zip-file of any of the above, with either only one file, or a
-# file named 'hosts' (with any extension).
-# Default:
-# https://www.malwaredomainlist.com/hostslist/hosts.txt,http://someonewhocares.org/hosts/hosts,http://winhelp2002.mvps.org/hosts.zip,http://malwaredomains.lehigh.edu/files/justdomains.zip,https://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintext
-host-block-lists = http://www.malwaredomainlist.com/hostslist/hosts.txt,http://someonewhocares.org/hosts/hosts,http://winhelp2002.mvps.org/hosts.zip,http://malwaredomains.lehigh.edu/files/justdomains.zip,http://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintext
-
-# host-blocking-enabled (Bool):
-# Whether host blocking is enabled.
-# Valid values: true, false
-# Default: true
-host-blocking-enabled = true
-
-# host-blocking-whitelist (List of String):
-# List of domains that should always be loaded, despite being
-# ad-blocked.
-# Domains may contain * and ? wildcards and are otherwise required
-# to exactly match the requested domain.
-# Local domains are always exempt from hostblocking.
-# Default: piwik.org
-host-blocking-whitelist = piwik.org
-
-# enable-pdfjs (Bool):
-# Enable pdf.js to view PDF files in the browser.
-# Note that the files can still be downloaded by clicking the
-# download button in the pdf.js viewer.
-# Valid values: true, false
-# Default: false
-enable-pdfjs = false
-
-
-# Hinting settings.
-[hints]
-
-# border (String):
-# CSS border value for hints.
-# Default: 1px solid #E3BE23
-border = 1px solid #E3BE23
-
-# mode (String):
-# Mode to use for hints.
-# number: Use numeric hints. (In this mode you can also type
-# letters form the hinted element to filter and reduce the number of
-# elements that are hinted.)
-# letter: Use the chars in the hints -> chars setting.
-# word: Use hints words based on the html elements and the extra
-# words.
-# Default: letter
-mode = letter
-
-# chars (UniqueCharString):
-# Chars used for hint strings.
-# Default: asdfghjkl
-chars = aoeuidhtns
-
-# min-chars (Int):
-# Minimum number of chars used for hint strings.
-# Default: 1
-min-chars = 2
-
-# scatter (Bool):
-# Whether to scatter hint key chains (like Vimium) or not (like
-# dwb). Ignored for number hints.
-# Valid values: true, false
-# Default: true
-scatter = false
-
-# uppercase (Bool):
-# Make chars in hint strings uppercase.
-# Valid values: true, false
-# Default: false
-uppercase = true
-
-# dictionary (File):
-# The dictionary file to be used by the word hints.
-# Default: /usr/share/dict/words
-dictionary = /usr/share/dict/words
-
-# auto-follow (String):
-# Controls when a hint can be automatically followed without the
-# user pressing Enter.
-# always: Auto-follow whenever there is only a single hint on a
-# page.
-# unique-match: Auto-follow whenever there is a unique non-empty
-# match in either the hint string (word mode) or filter (number
-# mode).
-# full-match: Follow the hint when the user typed the whole hint
-# (letter, word or number mode) or the element's text (only in
-# number mode).
-# never: The user will always need to press Enter to follow a
-# hint.
-# Default: unique-match
-auto-follow = unique-match
-
-# auto-follow-timeout (Int):
-# A timeout (in milliseconds) to inhibit normal-mode key bindings
-# after a successful auto-follow.
-# Default: 0
-auto-follow-timeout = 0
-
-# next-regexes (List of Regex):
-# A comma-separated list of regexes to use for 'next' links.
-# Default:
-# \bnext\b,\bmore\b,\bnewer\b,\b[>→≫]\b,\b(>>|»)\b,\bcontinue\b
-next-regexes = \bnext\b,\bmore\b,\bnewer\b,\b[>→≫]\b,\b(>>|»)\b,\bcontinue\b
-
-# prev-regexes (List of Regex):
-# A comma-separated list of regexes to use for 'prev' links.
-# Default: \bprev(ious)?\b,\bback\b,\bolder\b,\b[<←≪]\b,\b(<<|«)\b
-prev-regexes = \bprev(ious)?\b,\bback\b,\bolder\b,\b[<←≪]\b,\b(<<|«)\b
-
-# find-implementation (String):
-# Which implementation to use to find elements to hint.
-# javascript: Better but slower
-# python: Slightly worse but faster
-# Default: python
-find-implementation = javascript
-
-# hide-unmatched-rapid-hints (Bool):
-# Controls hiding unmatched hints in rapid mode.
-# Valid values: true, false
-# Default: true
-hide-unmatched-rapid-hints = true
-
-
-# Definitions of search engines which can be used via the address bar.
-# The searchengine named `DEFAULT` is used when `general -> auto-search`
-# is true and something else than a URL was entered to be opened. Other
-# search engines can be used by prepending the search engine name to the
-# search term, e.g. `:open google qutebrowser`. The string `{}` will be
-# replaced by the search term, use `{{` and `}}` for literal `{`/`}`
-# signs.
-[searchengines]
-DEFAULT = ${duckduckgo}
-duckduckgo = https://duckduckgo.com/?t=chakra&q={}
-ddg = ${duckduckgo}
-google = https://encrypted.google.com/search?q={}
-g = ${google}
-wikipedia = http://en.wikipedia.org/w/index.php?title=Special:Search&search={}
-wiki = ${wikipedia}
-pcl = http://docs.pointclouds.org/trunk/search.php?query={}
-std = http://en.cppreference.com/mwiki/index.php?title=Special%3ASearch&search={}
-cv = http://docs.opencv.org/3.1.0/index.html#gsc.tab=0&gsc.ref=more%3A3.1&gsc.q={}
-
-
-# Aliases for commands.
-# By default, no aliases are defined. Example which adds a new command
-# `:qtb` to open qutebrowsers website:
-# `qtb = open https://www.qutebrowser.org/`
-[aliases]
-quit = close
-q = close
-exit = quit
-mpv = spawn --userscript ~/src/qutebrowser/misc/userscripts/view_in_mpv
-
-
-# Colors used in the UI.
-# A value can be in one of the following format:
-# * `#RGB`/`#RRGGBB`/`#RRRGGGBBB`/`#RRRRGGGGBBBB`
-# * An SVG color name as specified in http://www.w3.org/TR/SVG/types.html#ColorKeywords[the W3C specification].
-# * transparent (no color)
-# * `rgb(r, g, b)` / `rgba(r, g, b, a)` (values 0-255 or percentages)
-# * `hsv(h, s, v)` / `hsva(h, s, v, a)` (values 0-255, hue 0-359)
-# * A gradient as explained in http://doc.qt.io/qt-5/stylesheet-reference.html#list-of-property-types[the Qt documentation] under ``Gradient''.
-# A *.system value determines the color system to use for color
-# interpolation between similarly-named *.start and *.stop entries,
-# regardless of how they are defined in the options. Valid values are
-# 'rgb', 'hsv', and 'hsl'.
-# The `hints.*` values are a special case as they're real CSS colors, not Qt-CSS colors. There, for a gradient, you need to use `-webkit-gradient`, see https://www.webkit.org/blog/175/introducing-css-gradients/[the WebKit documentation].
-[colors]
-
-# completion.fg (QtColor):
-# Text color of the completion widget.
-# Default: white
-completion.fg = white
-
-# completion.bg (QssColor):
-# Background color of the completion widget.
-# Default: #333333
-completion.bg = #333333
-
-# completion.alternate-bg (QssColor):
-# Alternating background color of the completion widget.
-# Default: #444444
-completion.alternate-bg = #444444
-
-# completion.category.fg (QtColor):
-# Foreground color of completion widget category headers.
-# Default: white
-completion.category.fg = white
-
-# completion.category.bg (QssColor):
-# Background color of the completion widget category headers.
-# Default: qlineargradient(x1:0, y1:0, x2:0, y2:1, stop:0 #888888,
-# stop:1 #505050)
-completion.category.bg = qlineargradient(x1:0, y1:0, x2:0, y2:1, stop:0 #888888, stop:1 #505050)
-
-# completion.category.border.top (QssColor):
-# Top border color of the completion widget category headers.
-# Default: black
-completion.category.border.top = black
-
-# completion.category.border.bottom (QssColor):
-# Bottom border color of the completion widget category headers.
-# Default: ${completion.category.border.top}
-completion.category.border.bottom = ${completion.category.border.top}
-
-# completion.item.selected.fg (QtColor):
-# Foreground color of the selected completion item.
-# Default: black
-completion.item.selected.fg = black
-
-# completion.item.selected.bg (QssColor):
-# Background color of the selected completion item.
-# Default: #e8c000
-completion.item.selected.bg = #e8c000
-
-# completion.item.selected.border.top (QssColor):
-# Top border color of the completion widget category headers.
-# Default: #bbbb00
-completion.item.selected.border.top = #bbbb00
-
-# completion.item.selected.border.bottom (QssColor):
-# Bottom border color of the selected completion item.
-# Default: ${completion.item.selected.border.top}
-completion.item.selected.border.bottom = ${completion.item.selected.border.top}
-
-# completion.match.fg (QssColor):
-# Foreground color of the matched text in the completion.
-# Default: #ff4444
-completion.match.fg = #ff4444
-
-# completion.scrollbar.fg (QssColor):
-# Color of the scrollbar handle in completion view.
-# Default: ${completion.fg}
-completion.scrollbar.fg = ${completion.fg}
-
-# completion.scrollbar.bg (QssColor):
-# Color of the scrollbar in completion view
-# Default: ${completion.bg}
-completion.scrollbar.bg = ${completion.bg}
-
-# statusbar.fg (QssColor):
-# Foreground color of the statusbar.
-# Default: white
-statusbar.fg = white
-
-# statusbar.bg (QssColor):
-# Background color of the statusbar.
-# Default: black
-statusbar.bg = black
-
-# statusbar.fg.private (QssColor):
-# Foreground color of the statusbar in private browsing mode.
-# Default: ${statusbar.fg}
-statusbar.fg.private = ${statusbar.fg}
-
-# statusbar.bg.private (QssColor):
-# Background color of the statusbar in private browsing mode.
-# Default: #666666
-statusbar.bg.private = #666666
-
-# statusbar.fg.insert (QssColor):
-# Foreground color of the statusbar in insert mode.
-# Default: ${statusbar.fg}
-statusbar.fg.insert = ${statusbar.fg}
-
-# statusbar.bg.insert (QssColor):
-# Background color of the statusbar in insert mode.
-# Default: darkgreen
-statusbar.bg.insert = darkgreen
-
-# statusbar.fg.command (QssColor):
-# Foreground color of the statusbar in command mode.
-# Default: ${statusbar.fg}
-statusbar.fg.command = ${statusbar.fg}
-
-# statusbar.bg.command (QssColor):
-# Background color of the statusbar in command mode.
-# Default: ${statusbar.bg}
-statusbar.bg.command = ${statusbar.bg}
-
-# statusbar.fg.command.private (QssColor):
-# Foreground color of the statusbar in private browsing + command
-# mode.
-# Default: ${statusbar.fg.private}
-statusbar.fg.command.private = ${statusbar.fg.private}
-
-# statusbar.bg.command.private (QssColor):
-# Background color of the statusbar in private browsing + command
-# mode.
-# Default: ${statusbar.bg.private}
-statusbar.bg.command.private = ${statusbar.bg.private}
-
-# statusbar.fg.caret (QssColor):
-# Foreground color of the statusbar in caret mode.
-# Default: ${statusbar.fg}
-statusbar.fg.caret = ${statusbar.fg}
-
-# statusbar.bg.caret (QssColor):
-# Background color of the statusbar in caret mode.
-# Default: purple
-statusbar.bg.caret = purple
-
-# statusbar.fg.caret-selection (QssColor):
-# Foreground color of the statusbar in caret mode with a selection
-# Default: ${statusbar.fg}
-statusbar.fg.caret-selection = ${statusbar.fg}
-
-# statusbar.bg.caret-selection (QssColor):
-# Background color of the statusbar in caret mode with a selection
-# Default: #a12dff
-statusbar.bg.caret-selection = #a12dff
-
-# statusbar.progress.bg (QssColor):
-# Background color of the progress bar.
-# Default: white
-statusbar.progress.bg = white
-
-# statusbar.url.fg (QssColor):
-# Default foreground color of the URL in the statusbar.
-# Default: ${statusbar.fg}
-statusbar.url.fg = ${statusbar.fg}
-
-# statusbar.url.fg.success (QssColor):
-# Foreground color of the URL in the statusbar on successful load
-# (http).
-# Default: white
-statusbar.url.fg.success = white
-
-# statusbar.url.fg.success.https (QssColor):
-# Foreground color of the URL in the statusbar on successful load
-# (https).
-# Default: lime
-statusbar.url.fg.success.https = lime
-
-# statusbar.url.fg.error (QssColor):
-# Foreground color of the URL in the statusbar on error.
-# Default: orange
-statusbar.url.fg.error = orange
-
-# statusbar.url.fg.warn (QssColor):
-# Foreground color of the URL in the statusbar when there's a
-# warning.
-# Default: yellow
-statusbar.url.fg.warn = yellow
-
-# statusbar.url.fg.hover (QssColor):
-# Foreground color of the URL in the statusbar for hovered links.
-# Default: aqua
-statusbar.url.fg.hover = aqua
-
-# tabs.fg.odd (QtColor):
-# Foreground color of unselected odd tabs.
-# Default: white
-tabs.fg.odd = white
-
-# tabs.bg.odd (QtColor):
-# Background color of unselected odd tabs.
-# Default: grey
-tabs.bg.odd = grey
-
-# tabs.fg.even (QtColor):
-# Foreground color of unselected even tabs.
-# Default: white
-tabs.fg.even = white
-
-# tabs.bg.even (QtColor):
-# Background color of unselected even tabs.
-# Default: darkgrey
-tabs.bg.even = darkgrey
-
-# tabs.fg.selected.odd (QtColor):
-# Foreground color of selected odd tabs.
-# Default: white
-tabs.fg.selected.odd = white
-
-# tabs.bg.selected.odd (QtColor):
-# Background color of selected odd tabs.
-# Default: black
-tabs.bg.selected.odd = black
-
-# tabs.fg.selected.even (QtColor):
-# Foreground color of selected even tabs.
-# Default: ${tabs.fg.selected.odd}
-tabs.fg.selected.even = ${tabs.fg.selected.odd}
-
-# tabs.bg.selected.even (QtColor):
-# Background color of selected even tabs.
-# Default: ${tabs.bg.selected.odd}
-tabs.bg.selected.even = ${tabs.bg.selected.odd}
-
-# tabs.bg.bar (QtColor):
-# Background color of the tab bar.
-# Default: #555555
-tabs.bg.bar = #555555
-
-# tabs.indicator.start (QtColor):
-# Color gradient start for the tab indicator.
-# Default: #0000aa
-tabs.indicator.start = #0000aa
-
-# tabs.indicator.stop (QtColor):
-# Color gradient end for the tab indicator.
-# Default: #00aa00
-tabs.indicator.stop = #00aa00
-
-# tabs.indicator.error (QtColor):
-# Color for the tab indicator on errors..
-# Default: #ff0000
-tabs.indicator.error = #ff0000
-
-# tabs.indicator.system (ColorSystem):
-# Color gradient interpolation system for the tab indicator.
-# rgb: Interpolate in the RGB color system.
-# hsv: Interpolate in the HSV color system.
-# hsl: Interpolate in the HSL color system.
-# none: Don't show a gradient.
-# Default: rgb
-tabs.indicator.system = rgb
-
-# hints.fg (QssColor):
-# Font color for hints.
-# Default: black
-hints.fg = black
-
-# hints.bg (QssColor):
-# Background color for hints. Note that you can use a `rgba(...)`
-# value for transparency.
-# Default: qlineargradient(x1:0, y1:0, x2:0, y2:1, stop:0 rgba(255,
-# 247, 133, 0.8), stop:1 rgba(255, 197, 66, 0.8))
-hints.bg = qlineargradient(x1:0, y1:0, x2:0, y2:1, stop:0 rgba(255, 247, 133, 0.8), stop:1 rgba(255, 197, 66, 0.8))
-
-# hints.fg.match (QssColor):
-# Font color for the matched part of hints.
-# Default: green
-hints.fg.match = green
-
-# downloads.bg.bar (QssColor):
-# Background color for the download bar.
-# Default: black
-downloads.bg.bar = black
-
-# downloads.fg.start (QtColor):
-# Color gradient start for download text.
-# Default: white
-downloads.fg.start = white
-
-# downloads.bg.start (QtColor):
-# Color gradient start for download backgrounds.
-# Default: #0000aa
-downloads.bg.start = #0000aa
-
-# downloads.fg.stop (QtColor):
-# Color gradient end for download text.
-# Default: ${downloads.fg.start}
-downloads.fg.stop = ${downloads.fg.start}
-
-# downloads.bg.stop (QtColor):
-# Color gradient stop for download backgrounds.
-# Default: #00aa00
-downloads.bg.stop = #00aa00
-
-# downloads.fg.system (ColorSystem):
-# Color gradient interpolation system for download text.
-# rgb: Interpolate in the RGB color system.
-# hsv: Interpolate in the HSV color system.
-# hsl: Interpolate in the HSL color system.
-# none: Don't show a gradient.
-# Default: rgb
-downloads.fg.system = rgb
-
-# downloads.bg.system (ColorSystem):
-# Color gradient interpolation system for download backgrounds.
-# rgb: Interpolate in the RGB color system.
-# hsv: Interpolate in the HSV color system.
-# hsl: Interpolate in the HSL color system.
-# none: Don't show a gradient.
-# Default: rgb
-downloads.bg.system = rgb
-
-# downloads.fg.error (QtColor):
-# Foreground color for downloads with errors.
-# Default: white
-downloads.fg.error = white
-
-# downloads.bg.error (QtColor):
-# Background color for downloads with errors.
-# Default: red
-downloads.bg.error = red
-
-# webpage.bg (QtColor):
-# Background color for webpages if unset (or empty to use the
-# theme's color)
-# Default: white
-webpage.bg = white
-
-# keyhint.fg (QssColor):
-# Text color for the keyhint widget.
-# Default: #FFFFFF
-keyhint.fg = #FFFFFF
-
-# keyhint.fg.suffix (CssColor):
-# Highlight color for keys to complete the current keychain
-# Default: #FFFF00
-keyhint.fg.suffix = #FFFF00
-
-# keyhint.bg (QssColor):
-# Background color of the keyhint widget.
-# Default: rgba(0, 0, 0, 80%)
-keyhint.bg = rgba(0, 0, 0, 80%)
-
-# messages.fg.error (QssColor):
-# Foreground color of an error message.
-# Default: white
-messages.fg.error = ${statusbar.fg}
-
-# messages.bg.error (QssColor):
-# Background color of an error message.
-# Default: red
-messages.bg.error = red
-
-# messages.border.error (QssColor):
-# Border color of an error message.
-# Default: #bb0000
-messages.border.error = #bb0000
-
-# messages.fg.warning (QssColor):
-# Foreground color a warning message.
-# Default: white
-messages.fg.warning = ${statusbar.fg}
-
-# messages.bg.warning (QssColor):
-# Background color of a warning message.
-# Default: darkorange
-messages.bg.warning = darkorange
-
-# messages.border.warning (QssColor):
-# Border color of an error message.
-# Default: #d47300
-messages.border.warning = #d47300
-
-# messages.fg.info (QssColor):
-# Foreground color an info message.
-# Default: white
-messages.fg.info = white
-
-# messages.bg.info (QssColor):
-# Background color of an info message.
-# Default: black
-messages.bg.info = black
-
-# messages.border.info (QssColor):
-# Border color of an info message.
-# Default: #333333
-messages.border.info = #333333
-
-# prompts.fg (QssColor):
-# Foreground color for prompts.
-# Default: white
-prompts.fg = ${statusbar.fg}
-
-# prompts.bg (QssColor):
-# Background color for prompts.
-# Default: darkblue
-prompts.bg = #333333
-
-# prompts.selected.bg (QssColor):
-# Background color for the selected item in filename prompts.
-# Default: #308cc6
-prompts.selected.bg = #308cc6
-
-
-# Fonts used for the UI, with optional style/weight/size.
-# * Style: `normal`/`italic`/`oblique`
-# * Weight: `normal`, `bold`, `100`..`900`
-# * Size: _number_ `px`/`pt`
-[fonts]
-
-# _monospace (Font):
-# Default monospace fonts.
-# Default: xos4 Terminus, Terminus, Monospace, "DejaVu Sans Mono",
-# Monaco, "Bitstream Vera Sans Mono", "Andale Mono", "Courier New",
-# Courier, "Liberation Mono", monospace, Fixed, Consolas, Terminal
-_monospace = Hack, Terminus, Monospace, "DejaVu Sans Mono", Monaco, "Bitstream Vera Sans Mono", "Andale Mono", "Liberation Mono", "Courier New", Courier, monospace, Fixed, Consolas, Terminal
-
-# completion (Font):
-# Font used in the completion widget.
-# Default: 8pt ${_monospace}
-completion = 8pt ${_monospace}
-
-# completion.category (Font):
-# Font used in the completion categories.
-# Default: bold ${completion}
-completion.category = bold ${completion}
-
-# tabbar (QtFont):
-# Font used in the tab bar.
-# Default: 8pt ${_monospace}
-tabbar = 8pt ${_monospace}
-
-# statusbar (Font):
-# Font used in the statusbar.
-# Default: 8pt ${_monospace}
-statusbar = 8pt ${_monospace}
-
-# downloads (Font):
-# Font used for the downloadbar.
-# Default: 8pt ${_monospace}
-downloads = 8pt ${_monospace}
-
-# hints (Font):
-# Font used for the hints.
-# Default: bold 13px ${_monospace}
-hints = bold 12px ${_monospace}
-
-# debug-console (QtFont):
-# Font used for the debugging console.
-# Default: 8pt ${_monospace}
-debug-console = 8pt ${_monospace}
-
-# web-family-standard (FontFamily):
-# Font family for standard fonts.
-# Default:
-web-family-standard =
-
-# web-family-fixed (FontFamily):
-# Font family for fixed fonts.
-# Default:
-web-family-fixed =
-
-# web-family-serif (FontFamily):
-# Font family for serif fonts.
-# Default:
-web-family-serif =
-
-# web-family-sans-serif (FontFamily):
-# Font family for sans-serif fonts.
-# Default:
-web-family-sans-serif =
-
-# web-family-cursive (FontFamily):
-# Font family for cursive fonts.
-# Default:
-web-family-cursive =
-
-# web-family-fantasy (FontFamily):
-# Font family for fantasy fonts.
-# Default:
-web-family-fantasy =
-
-# web-size-minimum (Int):
-# The hard minimum font size.
-# Default: 0
-web-size-minimum = 0
-
-# web-size-minimum-logical (Int):
-# The minimum logical font size that is applied when zooming out.
-# Default: 6
-web-size-minimum-logical = 6
-
-# web-size-default (Int):
-# The default font size for regular text.
-# Default: 16
-web-size-default = 16
-
-# web-size-default-fixed (Int):
-# The default font size for fixed-pitch text.
-# Default: 13
-web-size-default-fixed = 13
-
-# keyhint (Font):
-# Font used in the keyhint widget.
-# Default: 8pt ${_monospace}
-keyhint = 8pt ${_monospace}
-
-# messages.error (Font):
-# Font used for error messages.
-# Default: 8pt ${_monospace}
-messages.error = 8pt ${_monospace}
-
-# messages.warning (Font):
-# Font used for warning messages.
-# Default: 8pt ${_monospace}
-messages.warning = 8pt ${_monospace}
-
-# messages.info (Font):
-# Font used for info messages.
-# Default: 8pt ${_monospace}
-messages.info = 8pt ${_monospace}
-
-# prompts (Font):
-# Font used for prompts.
-# Default: 8pt sans-serif
-prompts = 8pt sans-serif
repos / dotfiles.git / commitdiff